Godox WMicS2 RX2 UHF Wireless Receiver
The Godox WMicS2 RX2 UHF Wireless Receiver is suitable for use with your DSLR / mirrorless camera or smartphone equipped with a 3.5mm TRS or TRRS port. It is a wireless receiver that you can attach to your camera or clip to your clothing, ideal for vlogs or interviews on-the-go. This receiver has two channels and can be used in combination with one or two WMicS2 clip-on microphone/transmitters (sold separately), creating a portable solution for your one- or two-person interviews up to 656 feet away.
The receiver connects to your device’s 3.5mm TRS or TRRS port and has an additional 3.5mm headphone jack that allows you to monitor your audio in real time. The built-in 770mAh lithium battery allows you to record for long periods of time. The receiver has 1/4″-20 thread for your camera or on your clothing using the included rear clip and magnetic attachment. The OLED display shows information about connectivity, mode, battery level, frequency signal and volume.
Model: WMicS2 RX2
- Group: A/B
- Channel: 96 (Group A: 48; Group B: 48)
- RF-frequentiebereik: 514.56MHz-553.92MHz
- Audio frequency range: 40Hz-18KHz
- Audio Delay: 12ms
- Audio Input Port: 3.5mm
- Lithium Battery Capacity: 770mAh
- Type-C Input Parameters: 5V/0.4A
- Working Temperature Range: -10~45℃
- Receiving Distance: Barrier-free receiving distance: 200m, Barriered receiving distance: 60m
- Signal Noise Ratio: ≈70dB
- Receive Sensitivity: -95dBm
- Distortion: Below 3%
- Dimension: 65.8×58.4×20.5mm (Antenna length: 65mm)
In the box
- 1x WMicS2 RX2
- 1x Type-C to USB Cable
- 1x Magnetic Plate
- 1x Back clip
- 1x 3.5mm TRS-TRRS Audio Connect Cable
- 1x 3.5mm TRS-TRS Audio Connect Cable




















