Car Mounts & Rigging | Cinegear Amsterdam https://cinegear.nl/tr/urun-kategori/cameras/camera-support-cameras/car-mounts-rigging/ Thu, 16 Apr 2026 13:49:13 +0000 tr hourly 1 https://wordpress.org/?v=6.9.4 https://cinegear.nl/wp-content/uploads/2019/12/cropped-Transparent_Normal_Logo-1-32x32.jpg Car Mounts & Rigging | Cinegear Amsterdam https://cinegear.nl/tr/urun-kategori/cameras/camera-support-cameras/car-mounts-rigging/ 32 32 Nitze Suction Cup 4.5″ with Built-in NATO Rail https://cinegear.nl/tr/urun/nitze-suction-cup-4-5-with-built-in-nato-rail/ Thu, 13 Mar 2025 02:57:41 +0000 https://cinegear.nl/?post_type=product&p=105819
  • High Load Capacity
  • Multiple Mounting Points
  • Wide Application

    • The post Nitze Suction Cup 4.5″ with Built-in NATO Rail appeared first on Cinegear Amsterdam.

    ]]>

    Features

    • High Load Capacity: Nitze N48-A45 4.5″ camera suction mount supports 60 kg/ 132 lb of vertical suction and 40 KG/ 88lb of horizontal suction for still shooting. When the dynamic speed is up to 80 km/h, the load capacity is 3 kg/ 6.6 lb.
    • Multiple Mounting Points: The suction cup mount features a built-in NATO rail and multiple 1/4″-20 locating holes and 3/8″-16 ARRI locating holes for accessories extending. A safety pin at the end of the NATO rail prevents accidental falls.
    • Wide Application: The suction cup camera mount can be attached to any clean, dry and smooth surfaces like metal/ceramic surfaces, car windscreen/windshield, flat glass door, car door, car hood, car window, etc. The suitable operating temperature range is -20°C (60°F )to -60°C (140°F).

    Notes

    ①Doing the adsorption test without load at first. If the test fails, please contact customer service.

    ② Mounting it onto recommended surfaces and check it at least every 4 hours.

    ③Keeping the suction cup chassis and filter cotton intact and clean. If broken or dirty, stop using it immediately.

    ④ If the white safety line of the suction valve is exposed during use, it is necessary to pump immediately until the white line is invisible.

    The post Nitze Suction Cup 4.5″ with Built-in NATO Rail appeared first on Cinegear Amsterdam.

    ]]>         DigitalFoto SNIPER-POCKET2 Z-Axis Car Damping Spring Arm for Action Camera&OSMO POCKET https://cinegear.nl/tr/urun/digitalfoto-sniper-pocket2-z-axis-car-damping-spring-arm-for-action-cameraosmo-pocket/ Tue, 28 Jan 2025 12:11:31 +0000 https://cinegear.nl/?post_type=product&p=102085
  • Mount & Stabilize Action Camera on Car
  • Arm & Suction Cup Connect via NATO Rail
  • Strong Suction Cup for High Speeds
  • Includes Holder for DJI OSMO Pocket 2/3
  • Mount Action Camera via 1/4"-20 Screws
  • Hydraulic Spring Reduces Bounce 10-30%
  • Maximum Load Capacity of .62 lb
  • Ultra-Compact and Travel-Friendly Size
  • Includes Safety Buckle, Screw & Rope
  • Premium All-Aluminum Build

    • The post DigitalFoto SNIPER-POCKET2 Z-Axis Car Damping Spring Arm for Action Camera&OSMO POCKET appeared first on Cinegear Amsterdam.

    ]]>

    The post DigitalFoto SNIPER-POCKET2 Z-Axis Car Damping Spring Arm for Action Camera&OSMO POCKET appeared first on Cinegear Amsterdam.

    ]]>         Selens Car Mounting System https://cinegear.nl/tr/urun/selens-car-mounting-system/ Sun, 01 Dec 2024 13:48:01 +0000 https://cinegear.nl/?post_type=product&p=94859
  • Three Φ150mm Suction Cup Mount with greater suction power for securer and more stable performance, each cup with suction power of 60kg and three cup with suction power of 180kg in total
  • Ballhead plate adopts 3/8'' thread of 12.9-level hardness, you could install any ballhead with 3/8'' thread hole on it
  • Vertical load of 50kg when the three cups are fully absorbed
  • Easily fasten your camera to the smooth surface like car window, glade doors
  • Multi-angle free adjustable and stretchable, meets you various needs

    • The post Selens Car Mounting System appeared first on Cinegear Amsterdam.

    ]]>

    The post Selens Car Mounting System appeared first on Cinegear Amsterdam.

    ]]>         Selens Suction Cup Camera Mount Series https://cinegear.nl/tr/urun/selens-suction-cup-camera-mount-series/ Sun, 01 Dec 2024 13:40:04 +0000 https://cinegear.nl/?post_type=product&p=94858
  • Multiple Screw Holes
  • Hand Pump Vacuum Suction Cup
  • Wrap-around Air Pump Design

    • The post Selens Suction Cup Camera Mount Series appeared first on Cinegear Amsterdam.

    ]]>

    The post Selens Suction Cup Camera Mount Series appeared first on Cinegear Amsterdam.

    ]]>         Tilta Hydra Alien Mini Car Mounting System with Regular Suction Cup https://cinegear.nl/tr/urun/tilta-hydra-alien-mini-car-mounting-system-with-regular-suction-cup/ Tue, 26 Nov 2024 23:57:16 +0000 https://cinegear.nl/?post_type=product&p=94377
  • Shock-Absorbing Arm
  • 1.32 lb Load Capacity
  • 6" Suction Cup with Rosette
  • Hydraulic Damping, Automotive-Grade Oil
  • Mounting Bracket and Support Arm
  • Optional Electronic Suction Cup
  • Aluminum Alloy Rig Weighs Only 2.17 lb

    • The post Tilta Hydra Alien Mini Car Mounting System with Regular Suction Cup appeared first on Cinegear Amsterdam.

    ]]>

    Genel Bakış

    Create steady tracking shots with your action camera using the titanium gray Hydra Alien Mini Car Mount Kit from Tilta. This portable and lightweight mount features a shock-absorbing arm for stable camera support on cars or other vehicles. The kit includes a 6″ suction cup mount, an extender support arm, a counterweight, and a soft carrying case for easy transport and setup.


    Hydraulic Stabilization Arm

    Inspired by the larger Tilta Hydra Arm, the Hydra Alien Mini system features a shock-absorbing arm for enhanced camera stability. Built with US-manufactured, automotive-grade hydraulic oil, the system allows for easy oil replenishment as needed.

    6″ Suction Cup Base

    • The 6″ suction cup provides a secure attachment for the Hydra Alien Mini mount on vehicles.
    • An optional 4.5″ electronic suction cup can be used for added functionality.

    Lightweight and Durable Design

    • Weighing only 2.17 lb, the Hydra Alien Mini is highly portable and easy to set up.
    • Perfect for capturing dynamic shots from cars and other moving vehicles.
    • Constructed from CNC-machined aluminum alloy for lightweight durability.

    In The Box

    Tilta Hydra Alien Mini Car Mount (Titanium Gray)
    Suction Cup with Rosette Mount (6″)
    Shock-Absorbing Arm
    Tilta Counterweight (7.7 oz)
    Mounting Bracket
    Support Arm
    Soft Carrying Case
    Limited 2-Year Manufacturer Warranty

    Compatibility

    • This compact arm system can be used with the DJI Action 3 and 4, the Pocket 3, and the Insta360 X3 and X4.
    • It supports similar camera rigs weighing up to 1.32 lb.
    • It provides secure, smooth support for the Tilta Khronos cage line for smartphones.
    • Create smooth handheld using the separately available handgrip.

    The post Tilta Hydra Alien Mini Car Mounting System with Regular Suction Cup appeared first on Cinegear Amsterdam.

    ]]>         Tilta Hydra Alien Mini Car Mounting System with Electronic Suction Cup https://cinegear.nl/tr/urun/tilta-hydra-alien-mini-car-mounting-system-with-electronic-suction-cup/ Tue, 26 Nov 2024 23:53:43 +0000 https://cinegear.nl/?post_type=product&p=94376
  • Shock-Absorbing Arm
  • 1.32 lb Load Capacity
  • Battery-Powered 4.5" Suction Cup
  • Hydraulic Damping, Automotive-Grade Oil
  • Monitors Real-Time Pressure
  • Automatic Suction Increases If Leaking
  • Mounting Bracket and Support Arm
  • 2000mAh Battery, Runtime up to 8 Hours
  • Optional 5V/1A USB-C Power Supply
  • Aluminum Alloy Rig Weighs Only 2.17 lb

    • The post Tilta Hydra Alien Mini Car Mounting System with Electronic Suction Cup appeared first on Cinegear Amsterdam.

    ]]>

    Genel Bakış

    Achieve seamless tracking shots with your action camera using Tilta’s titanium gray Hydra Alien Mini Car Mount Kit with Electronic Suction Cup. This lightweight and compact mount securely attaches your camera to a vehicle using a shock-absorbing arm for stability. The electronic suction cup offers real-time pressure monitoring and supports an optional USB-C power supply for uninterrupted shooting during extended sessions.


    • Rely on the electronic suction cup to firmly attach the Hydra Alien Mini mount to your vehicle.
    • This 4.5″ suction cup features real-time pressure monitoring and automatically increases suction if a leak is detected.
    • With a 2000mAh internal battery, it delivers up to eight hours of continuous runtime.
    • For extended use, the suction cup can also be powered via an external 5V, 1A power source.
    • The whole Hydra Alien Mini rig weighs just 2.17 lb.
    • Suitable for capturing shots from cars and other vehicles.
    • Built using a CNC-machined aluminum alloy,

    In The Box

    Tilta Hydra Alien Mini Car Mount Kit with Electronic Suction Cup (Titanium Gray)
    Electronic Suction Cup with Rosette Mount (4.5″, Titanium Gray)
    Shock-Absorbing Arm (Titanium Gray)
    Tilta Counterweight (7.7 oz)
    Mounting Bracket (Titanium Gray)
    Support Arm (Titanium Gray)
    Soft Carrying Case
    Limited 2-Year Manufacturer Warranty

    Compatibility

    • This compact arm system can be used with the DJI Action 3 and 4, the Pocket 3, and the Insta360 X3 and X4.
    • It supports similar camera rigs weighing up to 1.32 lb.
    • It provides secure, smooth support for the Tilta Khronos cage line for smartphones.
    • Create smooth handheld using the separately available handgrip.

    The post Tilta Hydra Alien Mini Car Mounting System with Electronic Suction Cup appeared first on Cinegear Amsterdam.

    ]]>         Tilta Hydra Alien Pro Car Mounting System https://cinegear.nl/tr/urun/tilta-hydra-alien-pro-car-mounting-system/ Tue, 26 Nov 2024 21:54:29 +0000 https://cinegear.nl/?post_type=product&p=94326 The system utilizes a highly customizable combination of dovetail-like plates and suction cups that allows users to fine-tune the exact placement of their shot to achieve almost any angle possible when mounting to a vehicle.

    The post Tilta Hydra Alien Pro Car Mounting System appeared first on Cinegear Amsterdam.

    ]]>     Shooting Configurations
    Front-End Side Configuration
    Rear Configuration
    Car Hood Configuration
    Side Mounting Configuration

    The Hydra Alien Pro Car Mounting System is a next generation gimbal support solution for car-mounted cinematography and is one of the most accessible and innovative Car Mounting Solutions for RS4 Pro to Ronin 2, starting from $1799 for Pre Order.

    The system utilizes a highly customizable combination of dovetail-like plates and suction cups that allows users to fine-tune the exact placement of their shot to achieve almost any angle possible when mounting to a vehicle.

    The newly designed dovetail plates feature retractable safety pins at every position which the arm can be mounted. This drastically improves the safety of the system, especially when adjusting the position of the arm via a new sliding design which makes small adjustments quick and easy.

    The newly designed shock absorbing arm supports higher payloads up to 28.7lbs and features a motorized shock absorbing head which provides greater stability and uses motors to help stabilize the system similar to a gimbal.

    When paired with the optional Nucleus Nano 2 Control Handle, the damping of the shock absorbing head can be adjusted remotely which makes this ideal for fast paced environments and provides the opportunity to fine tune damping settings as road conditions change in real time.

    When paired with a lightweight gimbal, this creates an incredibly smooth image while being more user friendly when compared to traditional systems. This innovative system greatly expands possibilities for both entry level and experienced users who may not have the full budget needed for more traditional vehicle mounted rigs.

    Optional accessories like the electronic suction cups and our dovetail mounting kit are great options for expanding the functionality of this system.

    Please note: when using larger gimbals like the Ronin 2, we recommend only rigging the Hydra Alien Pro with Speed Rail as other suction cup based options are not strong enough to reliably support the system.

    The post Tilta Hydra Alien Pro Car Mounting System appeared first on Cinegear Amsterdam.

    ]]>         Hydra Arm Motorized Slider https://cinegear.nl/tr/urun/hydra-arm-motorized-slider/ Sun, 04 Aug 2024 23:20:19 +0000 https://cinegear.nl/?post_type=product&p=89632
  • Heavy-Duty Vehicle-Mounted Crane
  • Weighs 176 lb, 22.05 lb Load Capacity
  • Shock-Absorbing Arm & Head for Gimbal
  • For RS 3 Pro/RS 2 & Similar Gimbals
  • Suction Cups, Speedrails, Straps
  • Wired Controller Controls Arm Pan/Tilt

    • The post Hydra Arm Motorized Slider appeared first on Cinegear Amsterdam.

    ]]>

    Genel Bakış

    The Hydra Arm Mini Pro Kit from Tilta offers quick setup with eight mounting configurations, making it easy to attach to your car. This versatile shock-absorbing system is designed for use with the DJI RS 3 Pro, RS 2, and other compatible stabilizers. It mounts securely on top of your vehicle using suction cups, speed rails, and safety straps, and its 176 lb weight is manageable for most cars. The included wired remote control lets you fine-tune the arm’s movement speed, pan and tilt adjustments, and dampening, as well as control the DJI RS 3 Pro or RS 2 gimbal.


    Compatibility

    Designed specifically for the DJI RS 3 Pro and RS 2 gimbal stabilizers, the system is also compatible with a range of gimbals and camera systems such as the Ronin 4D, Ronin MX, and FREEFLY MoVI Pro. Other gimbals can be used as well as long as they can be mounted via 1/4″-20 threads, powered via V-mount batteries, and stay within the 22 lb weight limit.

    Endure Extreme Conditions

    The shock-absorbing arm and slider are made of aerospace-grade aluminum alloy and 304 stainless steel, allowing for a wide range of operating temperatures from -30℃ to 80℃ (-22℉ to 176℉). The system is resilient to extreme weather condition such as wind, rain, and snow.

    Quick Elevation

    The slider can travel from its highest to lowest point in just 4 seconds. It descends at a rate of 0.45 meters per second.

     

    New Slider Control Handle

    The slider comes with a control handle and control terminal, enabling remote operation of the slider via a wired or wireless connection from inside the vehicle. Supports future firmware upgrades for added convenience.

    Efficient Power

    Only four 14.8V camera batteries are needed to power the system. Four 270Wh (18600mAh) batteries can support a full day of shooting.

    The post Hydra Arm Motorized Slider appeared first on Cinegear Amsterdam.

    ]]>         Rear Seat Monitor Mounting Bracket Pro https://cinegear.nl/tr/urun/rear-seat-monitor-mounting-bracket-pro/ Sun, 04 Aug 2024 15:52:30 +0000 https://cinegear.nl/?post_type=product&p=89633
  • Secure Monitor to Car Headrest
  • Articulating Mounting Plates
  • Multiple 1/4"-20 and 3/8"-16 Threads
  • V-Mount Battery Plate

    • The post Rear Seat Monitor Mounting Bracket Pro appeared first on Cinegear Amsterdam.

    ]]>

    Genel Bakış

    The Tilta Rear Seat Monitor Mounting Bracket Pro attaches to the back of your car seat’s headrest, providing a stable platform for a monitor and controller setup, ideal for vehicle-mounted shooting or drone footage. It features a long dovetail-style plate that braces against the vehicle’s floor for added stability. The top mounting plate is adjustable for precise monitor positioning, and multiple 1/4″-20 and 3/8″-16 threads allow for versatile accessory attachment. The integrated V-mount battery plate lets you power your monitor by adding a battery to the setup.

    Specifications

    Mounting Multiple 1/4″-20 Threads
    Multiple 3/8″-16 Threads
    Color Black
    Material of Construction Aluminum Alloy
    Dimensions 35 x 11 x 10″ / 88.9 x 27.9 x 25.4 cm
    Weight 14.5 lb / 6.6 kg

    The post Rear Seat Monitor Mounting Bracket Pro appeared first on Cinegear Amsterdam.

    ]]>         Tilta Hydra Articulating Car Mounting System https://cinegear.nl/tr/urun/tilta-hydra-articulating-car-mounting-system/ Thu, 06 Jun 2024 18:25:20 +0000 https://cinegear.nl/?post_type=product&p=87055 Introducing the Hydra Articulating Car Mounting System, the newest addition to the Hydra Arm family. Featuring three 6” suction cups with heavy-duty articulating arms and a 44 lb weight capacity, this lightweight system is ideal for both interior and exterior car shots in various environments.

    The post Tilta Hydra Articulating Car Mounting System appeared first on Cinegear Amsterdam.

    ]]>

    Ball Heard With Manfrotto Quick Release System

    Featuring a low-center-of-gravity ball head designed for 75mm bowls and a Manfrotto quick release system, it supports both Arca and Manfrotto plates. Compatible with most Tilta cages for mirrorless and lightweight cinema cameras, it also offers a 15° level adjustment range.

    Manfrotto Quick Release Extender Plate

    This plate features multiple mounting points, making it compatible with camera cages, L-brackets, and similar accessories. It prevents accidental disconnection, ensuring your device remains secure.

    Manfrotto Quick Release Module

    Mounted on the 75mm ball head, this module works with Manfrotto extended quick release plates and other Manfrotto-standard accessories, ensuring ease of use.

    Triangular Support System

    Featuring three 6” suction cups with heavy-duty articulating arms for a total weight capacity of 44 lbs. This system is ideal for using both inside and outside of a vehicle in a variety of environments.

    Heavy Duty Articulating Arm

    Made from high-strength aluminum alloy and stainless steel, each articulating arm has a maximum carrying capacity of 17.5 lbs and features a reversible locking knob for convenient use.

    6” Suction Cup With NATO Rail

    With strong expansion capabilities, it easily supports articulating arms and other accessories.

    The post Tilta Hydra Articulating Car Mounting System appeared first on Cinegear Amsterdam.

    ]]>