Wireless | Cinegear Amsterdam

Hollyland Lark Max 2 Person Wireless Microphone System

Webmaster — Fri, 10 Nov 2023 15:31:13 +0000

The post Hollyland Lark Max 2 Person Wireless Microphone System appeared first on Cinegear Amsterdam.

Hollyland Lark Max Solo Wireless Microphone System

Webmaster — Fri, 10 Nov 2023 15:26:23 +0000

For Mobile Journalism, Content Creation
Transmitter with Built-In Omni Mic
Dual-Channel Receiver
Environmental Noise Cancellation
Dual-Signal Processing Technology
14-Hour Backup Recording
Up to 820' Transmission Distance
7.5-Hour Transmitter Battery Life
OLED Receiver Touchscreen

The post Hollyland Lark Max Solo Wireless Microphone System appeared first on Cinegear Amsterdam.

Tilta Nucleus-M Partial Kit 1 (WLC-T03-K1)

Webmaster — Wed, 01 Nov 2023 17:31:38 +0000

The Tilta Nucleus-M Wireless Lens Control System Partial Kit I contains the essential elements for pulling focus wirelessly. The kit includes the Nucleus-M FIZ hand unit controller, one Nucleus-M motor, one removable lens belt, a motor power cable, two marking disks for the hand unit, a lanyard for the hand unit, and a battery charger. The system enables pulling focus, iris, or zoom on your lens, and if you are using a lens that does not have standard cine-style gears, then use the included lens belt to add gears to your lens.

This partial kit is a single-axis system, but the hand unit will allow you to control additional motors (not included) so you can control more than one lens ring. The system can wirelessly pull focus from up to 1000′ away, and batteries can power the hand unit for approximately 10 hours on a single charge (batteries not included). The lanyard attaches to the hand control unit, allowing you to wear it around your neck.

Note:

Please note that batteries are not included and must be sourced separately.

Tilta Nucleus-M FIZ Hand Unit

The Tilta Nucleus-M FIZ Hand Unit provides three-channel wireless focus, iris, and/or zoom control as part of the Nucleus-M lens control system. The hand unit features a large wood-edged focus knob, a zoom joystick, an iris wheel, and a backlit LED display window.

Select from low, medium, and maximum transmission ranges to best suit your working distance and battery reserves. The Nucleus-M FIZ Hand Unit’s choice of 15 2.4 GHz channels minimizes the chance of interference in high-traffic areas. Set up to 10 soft stops with vibration for focus pulls, and calibrate lenses automatically or manually.

Wireless run/stop is available for select cameras using the hand unit and separately available cables. The hand unit is powered by two separately available lithium-ion batteries and can operate for up to 10 hours on a single charge.

Note:

Please note that batteries are not included and must be sourced separately.

Features

3-channel wireless lens control unit
Control focus, iris, and/or zoom
Short-, medium-, and long-range transmission options
15-channel selection minimizes outside interference
Powered via two 18650 rechargeable lithium-ion batteries (not included)
Up to 10-hour runtime on a single charge
Ambidextrous design with large wood-edged knob

Tilta Nucleus-M FIZ Lens Control Motor

The compact Tilta Nucleus-M FIZ Lens Control Motor features an integrated motor drive, eliminating the space of a separate drive box and enabling a quicker setup. Power the motor using a separately available D-Tap cable and power source, or daisy-chain to another motor using a 7-pin cable.

The Nucleus-M wireless motor includes a cine standard 0.8 Mod drive gear and a 19mm rod adapter with a bushing for mounting onto a 15mm rod. The motor features automatic or manual calibration, a display window, and high, medium, and low torque settings.

Features

Brushless motor with an integrated motor drive
Cine-lens standard 0.8 Mod, 35-tooth, 32-pitch gear
Motor clamps onto 19mm or 15mm rods (with included bushing)
Power via separately available D-Tap cable or daisy-chain to additional motors
Automatic and manual calibration
For focus, iris, or zoom control
High, medium, and low torque settings
Status display window

Tilta DSLR Lens Follow Focus Adapter

Use this DSLR Lens Follow Focus Adapter from Tilta to tie around your DSLR lens and control focus with any of Tilta’s follow focus systems such as the Nucleus-Nano or Nucleus-M. The adjustable, zip tie-style adapter ring is made of silicone and plastic and ties around most DSLR lenses. The teeth lock into the follow focus motor’s gear for smooth adjustments.

Tilta Nucleus-M D-Tap to 7-Pin Motor Power Cable

This 23″ Nucleus-M D-Tap to 7-Pin Motor Power Cable from Tilta is designed to power your Nucleus-M lens control motor using a D-Tap power source.

After powering one motor with this cable, other motors may be daisy-chained to each other.

Tilta Nucleus-M Follow Focus Marking Disk

The Tilta Follow Focus Marking Disk is compatible with the Nucleus-M FIZ hand unit. Use this white plastic disk for creating custom focus marks used for pulling focus.

Tilta Lanyard for Nucleus-M FIZ Hand Unit

The Tilta Nucleus-M Lanyard is compatible with the Nucleus-M FIZ control hand unit. Use this strap to carry the control unit around your neck or to drape it from a stand. Lanyard features include a swiveling quick release clip and a wide nylon strap.

Tilta Nucleus-M Battery Charger

The Tilta Nucleus-M Battery Charger can charge one to four batteries used in the handset and handles of the Nucleus-M wireless lens control system. This versatile charger can be powered using AC, 5V USB, or 12V vehicle power. Compatible with 18650 lithium-ion and select other batteries, the charger features LED status lights and spring-loading for a secure battery fit.

Compatible Batteries

26650, 22650
18650, 18490, 18350
17670, 17500
16340, 14500, 10400
RCR123
NiMH/NiCd: AA, AAA, AAAA, C

The post Tilta Nucleus-M Partial Kit 1 (WLC-T03-K1) appeared first on Cinegear Amsterdam.

Tilta MB-TM-WC Wireless Controller for Tilta Mirage

Webmaster — Wed, 01 Nov 2023 17:31:29 +0000

Wireless Lens Focus Control Wheel
Connects Remotely to Variable ND Module
Control Focus via Nucleus-Nano or -M
328' Operating Distance, 2.4 GHz Wi-Fi
Powered by 14500 Battery (Not Included)
Attaches via NATO Mount or Rail Adapter

The post Tilta MB-TM-WC Wireless Controller for Tilta Mirage appeared first on Cinegear Amsterdam.

PortKeys BM7II DS 2200nit Wide Color Gamut Wireless Camera Control Monitor

Webmaster — Tue, 23 May 2023 11:25:51 +0000

PortKeys BM7ⅡDS 2200nit Wide Color Gamut Wireless Camera Control Monitor

Wireless Camera Control

Wireless Camera Control:KOMODO | V-RAPTOR | BMPCC4K | BMPCC6K | BMPCC 6K Pro SONY: A7MⅢ | RX0 | A1 | A9Ⅱ | A7C | FX3 | FX30 | RX10 | A7SⅢ | A7M Ⅳ

* Wireless control does not mean wireless video transmission, a video signal cable still needs to be connected during video transmission

Custom JPG Picture Freeze Frame

After capturing an image, it can be compared with real-time video by semi-transparent image superposition

Note: Must be a 16:9 1920×1080 jpg image

Split Screen Monitoring

Two screens can load the same 3D LUT file, support dual horizontal/dual vertical/left horizontal and right vertical/left vertical and right horizontal/ left horizontal and right vertical cropping of the same source

Note: Left and right screens can be flipped individually and mirrored

3D LUT HDMI Output

HDMI、3G-SDI can output video after loading 3D LUT

Wired Control Tilta Nucleus-N/M Motors

Compatible with Tilta Nucleus-N/M Motors and display the wireless follow the focus scale

CNC Aluminum Alloy All-metal Shell

With fast heat dissipation and high durability

Wired control of RED cinema camera

DSMC3 EXT control line (optional) to control DSMC3

DSMC2 CTRL control line (optional) to control DSMC2

Anamorphic Lens Calibration

Supported Ratio: 1.00X/1.33X/1.42X/1.50X/1.60X/1.66X/1.85X/2.00X/2.35X

User-defined adjustment range: 0.25X-4.00X

HDMI to SDI Output

Built-in signal conversion, no external signal conversion box required

False color and ARRI False color

Customisable overexposure and underexposure IRE scales

Brightness and RGB Signal Detection Before/After Loading 3D LUT

Loading 3D LUTs for better picture quality and more intuitive monitoring

Multiple Ways of Operating

Both button scroll wheel and touch screen, more flexibility in operation

Various Interfaces

Video input 3G-SDI×2/HDMI×1, video output 3G-SDI×1/HDMI×1, 3.5mm headphone jack×1

Customized Peaking Range(Peaking Frame)

Peaking perfectly avoids rendering camera parameters

Custom Rectangular Image Crop

Easily and clearly monitor the details of your images

Factory Color Calibration-709 colour gamut with X-Rite 1D hardware

More accurate color calibration and more intuitive image monitoring

The post PortKeys BM7II DS 2200nit Wide Color Gamut Wireless Camera Control Monitor appeared first on Cinegear Amsterdam.

HOLLYLAND Mars 4K 450ft UHD Wireless Single Video Transmitter

Webmaster — Fri, 12 May 2023 07:52:44 +0000

The Hollyland Mars 4K wireless video transmission system is capable of a 150m LOS range and ultra-low latency of 0.06s. The Mars 4K is designed to combine high performance and reliable quality at an affordable price.

4K UHD Video Transmission

The Mars 4K supports 4K UHD video transmission at 30fps for the discerning videographer looking for high-resolution production capability. The Mars 4K also supports FHD and HD formats at varying frame rates—24p, 30p, and 60p.

150m LOS Range and 0.06s Ultra-low Latency

The Mars 4K achieves an incredible LOS range of 150m and ultra-low latency of 0.06s. Its upgraded dual-core codec chip is capable of a 12 Mbps data transfer rate. *The LOS range of 150m is based on interference-free laboratory measurements.

HDMI & SDI Dual Interfaces

The Mars 4K supports HDMI and SDI input and output for expanded connectivity and compatibility. The SDI provides expanded frame rate flexibility for both broadcast and production frame rate (decimal-point frame rate) standards and compatibility through production and postproduction.

Flexible Monitoring Options

The Mars 4K transmitter is compatible with up to two receivers or four mobile devices with the app installed. Up to four mobile devices with the app installed allow a maximum of four parties (such as the director, producer, light control personnel, and audio personnel) on the site to monitor the shooting at the same time.

Operational Efficient Design Form Factor

The Mars 4K is featured with superior corrosion and wear resistance for outstanding durability. With disassembly-free, bullet-styled antennas attached, the well-thought-out design form factor optimizes operational functionality for fast configurations.

Smart Channel Scan and Selection

Channel assignment options allow for interference-free transmission. A stable connection is possible automatically upon startup. Smart channel scan helps determine which ones are occupied and selectable.

Color LCD with an Exclusive Rocker-Style Button

The Mars 4K features a color LCD with a user-friendly UI design that enables quick configurations and status checks. Its uniquely designed gamepad-styled button greatly improves the operational setup experience.

Multiple Power Supply Options

The Mars 4K supports a wide range of DC power options—6V to 16V, NP-F batteries, and USB Type-C chargers.

The post HOLLYLAND Mars 4K 450ft UHD Wireless Single Video Transmitter appeared first on Cinegear Amsterdam.

Nanlite NL-WS-TB-1 Transmitter Box

Webmaster — Thu, 26 Jan 2023 11:30:27 +0000

Designed to wirelessly control multiple lights in the Nanlite line, the NANLINK Transmitter Box is a 2400 MHz battery-driven unit that allows you to charge it while running on AC power. Bottom 1/4″-20 threads, a side belt clip, and a ring integrated into the chassis offer different ways to mount it. The included padded case has a belt loop and a carabiner clip. The NANLINK Transmitter Box is compatible with PavoTube II X-Series, PavoTube 30C and 15C, PavoTube II 6C, Forza 500, 300, 300B, 200, 150, 60, and 60B, MixPanel 150 and 60, FS 300, 200, and 150, LumiPad 25 and 11, Compac 200, and more.

The post Nanlite NL-WS-TB-1 Transmitter Box appeared first on Cinegear Amsterdam.

Rode Wireless GO II 2-Person Compact Wireless Microphone System (2.4 GHz, Black)

cineadmin1 — Fri, 03 Jun 2022 15:19:34 +0000

Expanding on the original Wireless GO with updates allowing for two-person shoots, onboard recording, a greatly extended range, and flexible output options, the black Rode Wireless Go II system lets videographers, vloggers, and mobile journalists confidently and quickly incorporate wireless audio into their setup regardless of their experience level or what device they’re recording to.

Boasting secure Series IV 2.4 GHz digital transmission, easy operability, and built-in mics (lavalier mics available separately), the system is ready to go at the press of a button; you can focus on getting the shot knowing that the Wireless GO II is delivering quality audio at a range of up to 656 feet. There are no menus and no finicky dials, just simple power-on-and-go functionality and a bright, informative LCD screen showing you what you need to see. When you’re ready for more, use Rode’s companion app to access a powerful feature set and extended customization of settings.

Version II Upgrades

Whereas the original Wireless GO employed a single channel, version II is a dual-channel system, capable of handling two transmitters at the same time for simple, two-person shoots with low latency (3.5 to 4 ms).
Use the Rode Central companion app (Mac, Windows, iOS, and Android compatible) to unlock powerful features and device customization—onboard transmitter recording, configurable safety track recording in dual mono mode, file playback and export, and more.
Via the app, each transmitter provides an onboard audio recorder offering up to seven hours of uncompressed recording (24-bit / 48 kHz WAV) or 24 hours of compressed recording, perfect for worry-free backup recording or a fast and easy way to capture sound from your subjects. Export files in various formats such as MP3 or WAV (16-, 24-, or 32-bit float) with date and time stamp information as well as automatic markers anywhere the transmitter-receiver link was broken.
Since the Wireless GO II can handle two transmitters at once, it features the ability to switch between stereo or dual-mono output modes. This enables each transmitter, and therefore each subject, to be recorded to a separate channel. Alternatively, signal from both transmitters can be mixed together and recorded identically to left and right channels. Use the app to activate safety track recording (-20 dB on the right channel).
In addition to the traditional 3.5mm TRS analog output, the Wireless GO II receiver has a USB Type-C digital audio output for operation as a 24-bit / 48 kHz audio interface. This can be connected to a computer with the supplied USB Type-C to USB Type-A cable, to the Lightning port of an iOS mobile device via the Rode SC15 cable, or to the USB Type-C port of a laptop, iPad Pro, or Android mobile device with the Rode SC16 cable (SC15 and SC16 cables available separately).
The new Series IV technology extends the line-of-sight operating range of the Wireless GO II to approximately 656′ compared to the 230′ maximum range of the original Wireless GO. It also offers increased signal strength in crowded wireless environments. Plus, the system is designed to run both transmitters without affecting the range performance.

The post Rode Wireless GO II 2-Person Compact Wireless Microphone System (2.4 GHz, Black) appeared first on Cinegear Amsterdam.

AOCHUAN Wireless Remote Control Electric Tripod Master M20

cineadmin1 — Mon, 28 Feb 2022 13:26:40 +0000

Key features:

Wireless Remote Control Electric Tripod : As compared to traditional manually-adjusted tirpod, the Master M20 supports wireless control elevate/decend/pause function via a Bluetooth remote or a button on the tripod. Your hands are set free to embrace the photography.
Power On and USE: After connection with the remote via Bluetooth, you can control the tripod and your phone’s camera from 20 meters distance via the remote. Meanwhile, It can control your smartphone’s original camera to take photos and videos.
Universal for various devices：With 1/4 & 3/8 screw interface, it compatible with gimbal, camera, smartphone,mirrorless camera, hydraulic stabilizer, fill light, microphone and more live streaming devices.
Four-section Adjustable: The Electric tripod can be adjusted in four level height 540mm-890mm-1265mm-1565mm. It’s more convenient for photography.
Aviation-grade Aluminum: Made of Aviation-grade Aluminum, the tripod is light and small, only 1.3KG and 60cm when folded, very easy to carry.

Specifications:

Product size：113*600*102mm（folded size）

Product weight：1.3kg

Max. weight capacity：5kg

Max. weight capacity of the hook：10kg

Battery Life (max. Weight capacity)：200 times

Charging time：About 3 hours

Four-Section Adjustment: 540mm-890mm-1265mm-1565mm

The post AOCHUAN Wireless Remote Control Electric Tripod Master M20 appeared first on Cinegear Amsterdam.

Zhiyun COV-03 Wireless Transmount Image Transmission Transmitter 2.0

cineadmin1 — Thu, 02 Dec 2021 09:18:28 +0000

Key Features

Ultra-low Latency&Long Transmission Distance: With an ultra-low latency of 60 milliseconds and over 100-meter effective transmission distance, Improved Image Quality and Stable Transmission, Transmount Image Transmission Transmitter 2.0 is designed for remote monitoringand shooting, giving you a flexible operation experience even in the most challenging environments.
One to Three , Synchronized Teamwork: Each Transmitter can send out Wi-fi signals to up to three devices ( mobile device , ipad, etc . ) for monitoring , which is suitable for the needs of collaborative shooting scenes.
Prolonged Runtime, Visible Battery Life: Thanks to the upgraded 3100mah battery capacity , now the Image TransmissionTransmitter 2.0 can achieve a maximum runtime of 3 hours . The newly added 4 LED indicators enables you to easily know the battery life status , giving you full control over your filmmaking.
Professional Monitoring via ZY PLAY: With the transmitter 2.0 and ZY Play APP , professional monitoring in 1080p 30fps can be easily achieved with a smartphone or ipad . All video parameters are just at your fingertips.
Live Preview on your Phone: Shoot , preview , and download . With the Image Transmission Transmitter 2.0 you canpreview and download the image files all through your phone . Filmmaking process has neverbeen so flexible.

The post Zhiyun COV-03 Wireless Transmount Image Transmission Transmitter 2.0 appeared first on Cinegear Amsterdam.