wireless control kit | Cinegear Amsterdam https://cinegear.nl/tr/urun-etiketi/wireless-control-kit/ Thu, 15 Jan 2026 12:33:16 +0000 tr hourly 1 https://wordpress.org/?v=6.9.5 https://cinegear.nl/wp-content/uploads/2019/12/cropped-Transparent_Normal_Logo-1-32x32.jpg wireless control kit | Cinegear Amsterdam https://cinegear.nl/tr/urun-etiketi/wireless-control-kit/ 32 32 Tilta Wireless Control Kit for Ronin S https://cinegear.nl/tr/urun/wireless-control-kit-for-ronin-s/ Wed, 01 Nov 2023 17:31:43 +0000 https://cinegear.nl/product/wireless-control-kit-for-ronin-s/
  • Wirelessly Control and Adjust Settings
  • 260' Wireless Range
  • Mount Gimbal on a Variety of Supports
  • Use Optional Gold or V-Mount Batteries

    • The post Tilta Wireless Control Kit for Ronin S appeared first on Cinegear Amsterdam.

    ]]>     Expand the control range and usefulness of your Ronin-S gimbal to use it on jibs, car rigs, and other support platforms with the Tilta Wireless Control Kit for Ronin-S. The kit features a wireless control handle that allows you to control the gimbal and adjust settings from up to 260′ away, freeing your gimbal to be operated not only by hand but also on a support platform such as the Tilta Hydra Alien car mounting rig (not included). With the wireless remote control, you can make adjustments to your gimbal easily, tweaking it from a distance between shots, saving you time as you don’t have to bring the gimbal to you or remove it from the mount to make adjustments.

    The kit also allows you to power your gimbal from available Gold or V-mount batteries via an included D-Tap to 2-pin power cable. This is especially useful when mounting the gimbal on a rig, as you don’t have to stop shooting to charge the internal batteries but can just change out the D-Tap power source when needed. Available larger-capacity Gold and V-mount batteries allow for longer runtimes and fewer battery swaps during the shoot day.

    Note:
    The Remote Control Handle requires a Sony-type F570/550 battery, which is not included and must be sourced separately.

    • Wirelessly operate and adjust settings on the Ronin-S
    • Operate the Ronin-S remotely; useful for moving car, jib, and crane shots
    • Quick pairing via the Wireless Receiver Module
    • Operate your gimbal for longer runtimes by using high-capacity Gold and V-mount batteries
    • Compatible with the optional Hydra Alien Monitor Bracket and any rosette connection

    The post Tilta Wireless Control Kit for Ronin S appeared first on Cinegear Amsterdam.

    ]]>         Tilta Nucleus-M Partial Kit 3 (WLC-T03-K3) https://cinegear.nl/tr/urun/tilta-nucleus-m-partial-kit-3-wlc-t03-k3/ Wed, 01 Nov 2023 17:31:26 +0000 https://cinegear.nl/product/tilta-nucleus-m-partial-kit-3-wlc-t03-k3/
  • Tilta Nucleus-M Left Handgrip
  • Tilta Nucleus-M FIZ Lens Control Motor
  • Tilta DSLR Lens Follow Focus Adapter
  • Tilta D-Tap to 7-Pin Motor Power Cable
  • Tilta 7-Pin to 7-Pin Motor Power Cable
  • ARRI-Compatible Rosette Adapters
  • Tilta Nucleus-M Battery Charger

    • The post Tilta Nucleus-M Partial Kit 3 (WLC-T03-K3) appeared first on Cinegear Amsterdam.

    ]]>

    The Tilta Nucleus-M Wireless Lens Control System Partial Kit III contains the essential elements for pulling focus wirelessly while handholding. The kit includes the Nucleus-M left handgrip controller, one Nucleus-M motor, one removable lens belt, two motor power cables, and a battery charger unit (batteries not included). The handgrip controller provides wireless fingertip lens control while functioning as handgrip support for your camera rig, and the system enables pulling either focus, iris, or zoom on your lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belt to add gears to your lens.

    This partial kit is a single axis system, but the Nucleus-M left handgrip controller will allow you to control additional motors (not included) so you can control more than one lens ring. The included motor power cables allow you to power a motor from either a D-Tap power source or a second motor via the 7-pin to 7-pin connector. The included power cables allow you to easily add a second motor (not included) to the system. The included rosettes aid in mounting the handgrip controller to your camera or rig with ARRI-style rosettes. The system can wirelessly pull focus from up to 1000′ away, and with separately available batteries you can power the hand unit for approximately 10 hours on a single charge.

    Tilta Nucleus-M Handgrip (Left)

    The Tilta left-side Wireless Handgrip provides fingertip lens control while also functioning as a handgrip support for your camera rig. This component of the separately available Nucleus-M FIZ (focus/iris/zoom) system enables you to split control between the handgrip and the hand unit as you prefer.

    With a wireless control range of up to 1000′, the Wireless Handgrip can be used for drone or car-mounted shots in addition to handheld configurations. Mount the handgrip using its ARRI-style rosette or use an optional adapter to mount to your gimbal. Use this grip with a separately available right-side grip for full focus, iris, and zoom control of cine-style lenses.

    Handgrip features include three knob-rotation settings, optional adapters for either bar- or ring-based gimbals, LED indicators, and an LCD display. An optional thumb joystick is available separately for the left handgrip. Powered by two 18650 lithium-ion batteries (not included), the handgrips can maintain a single charge for up to two days. As part of the Nucleus-M system, the Wireless Handgrip provides a run/stop function for select cameras.

    Features
    • Customizable focus, iris, and zoom control
    • Run/stop control for select cameras
    • ARRI-style rosette mounting and optional gimbal adapter mounts
    • 1000′ wireless control range
    • 85, 180, and 310° knob rotation settings
    • LCD display and LED indicators
    Tilta Nucleus-M FIZ Lens Control Motor

    The compact Tilta Nucleus-M FIZ Lens Control Motor features an integrated motor drive, eliminating the space of a separate drive box and enabling a quicker setup. Power the motor using a separately available D-Tap cable and power source, or daisy-chain to another motor using a 7-pin cable.

    The Nucleus-M wireless motor includes a cine standard 0.8 Mod drive gear and a 19mm rod adapter with a bushing for mounting onto a 15mm rod. The motor features automatic or manual calibration, a display window, and high, medium, and low torque settings.

    Features
    • Brushless motor with an integrated motor drive
    • Cine-lens standard 0.8 Mod, 35-tooth, 32-pitch gear
    • Motor clamps onto 19mm or 15mm rods (with included bushing)
    • Power via separately available D-Tap cable or daisy-chain to additional motors
    • Automatic and manual calibration
    • For focus, iris, or zoom control
    • High, medium, and low torque settings
    • Status display window
    Tilta DSLR Lens Follow Focus Adapter

    Use this DSLR Lens Follow Focus Adapter from Tilta to tie around your DSLR lens and control focus with any of Tilta’s follow focus systems such as the Nucleus-Nano or Nucleus-M. The adjustable, zip tie-style adapter ring is made of silicone and plastic and ties around most DSLR lenses. The teeth lock into the follow focus motor’s gear for smooth adjustments.

    Tilta Nucleus-M D-Tap to 7-Pin Motor Power Cable

    This 23″ Nucleus-M D-Tap to 7-Pin Motor Power Cable from Tilta is designed to power your Nucleus-M lens control motor using a D-Tap power source.

    After powering one motor with this cable, other motors may be daisy-chained to each other.

    Tilta Nucleus-M 7-Pin Motor-to-Motor Connection Cable (21.65″)

    The Tilta Nucleus-M 7-Pin Motor-to-Motor Connection Cable is 21.65″ long and provides power and control between two Nucleus-M follow focus motors. Please note, you will still need to power one of the motors via a D-Tap to 7-pin cable, or a 3-pin to 7-pin cable connected to a power source. Neither the motors, power cable, nor power source is included.

    Tilta ARRI-Standard Rosette Adapters for Nucleus-M Handgrip (L&R)

    This set of two ARRI-Standard Rosette Adapters from Tilta is used to mount your Nucleus-M lens control handgrips onto standard ARRI rosettes. Both right and left adapters are included in the set.

    The post Tilta Nucleus-M Partial Kit 3 (WLC-T03-K3) appeared first on Cinegear Amsterdam.

    ]]>         Tilta Nucleus-M Partial Kit 4 (WLC-T03-K4) https://cinegear.nl/tr/urun/tilta-nucleus-m-partial-kit-4-wlc-t03-k4/ Wed, 01 Nov 2023 17:31:26 +0000 https://cinegear.nl/product/tilta-nucleus-m-partial-kit-4-wlc-t03-k4/
  • Tilta Nucleus-M FIZ Hand Unit
  • 2 x Nucleus-M FIZ Lens Control Motors
  • 2 x Tilta DSLR Lens Follow Focus Adapter
  • Tilta D-Tap to 7-Pin Motor Power Cable
  • Tilta 7-Pin to 7-Pin Motor Power Cable
  • 2 x Nucleus-M Follow Focus Marking Disks
  • Lanyard for Nucleus-M FIZ Hand Unit
  • Tilta Nucleus-M Battery Charger

    • The post Tilta Nucleus-M Partial Kit 4 (WLC-T03-K4) appeared first on Cinegear Amsterdam.

    ]]>

    The Tilta Nucleus-M Wireless Lens Control System Partial Kit IV contains the essential elements for pulling focus and iris wirelessly. The kit includes the Nucleus-M FIZ hand unit controller, two Nucleus-M motors, two removable lens belts (DSLR Lens Follow Focus Adapters), two motor power cables, two marking disks for the hand unit, a lanyard for the hand unit, and a battery charger unit. The system enables an AC to pull focus and iris on a prime lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belts to add gears to your lens.

    This partial kit is a dual-axis system, typically controlling focus and iris, but the hand unit will allow you to control an additional motor (not included) for zoom control when using a zoom lens. The system can wirelessly pull focus from up to 1000′ away, and the batteries can power the hand unit for approximately 10 hours on a single charge (batteries not included). The first motor is powered via the included D-Tap to 7-pin cable; the second motor daisy-chains to the fist via the 7-pin to 7-pin cable for power. The lanyard attaches to the hand control unit, allowing you to wear it around your neck.

    Note:

    Please note that batteries are not included and must be sourced separately.
    Tilta Nucleus-M FIZ Hand Unit

    The Tilta Nucleus-M FIZ Hand Unit provides three-channel wireless focus, iris, and/or zoom control as part of the Nucleus-M lens control system. The hand unit features a large wood-edged focus knob, a zoom joystick, an iris wheel, and a backlit LED display window.

    Select from low, medium, and maximum transmission ranges to best suit your working distance and battery reserves. The Nucleus-M FIZ Hand Unit’s choice of 15 2.4 GHz channels minimizes the chance of interference in high-traffic areas. Set up to 10 soft stops with vibration for focus pulls, and calibrate lenses automatically or manually.

    Wireless run/stop is available for select cameras using the hand unit and separately available cables. The hand unit is powered by two separately available lithium-ion batteries and can operate for up to 10 hours on a single charge.

    Note:

    Please note that batteries are not included and must be sourced separately.
    Features
    • 3-channel wireless lens control unit
    • Control focus, iris, and/or zoom
    • Short-, medium-, and long-range transmission options
    • 15-channel selection minimizes outside interference
    • Powered via two 18650 rechargeable lithium-ion batteries (not included)
    • Up to 10-hour runtime on a single charge
    • Ambidextrous design with large wood-edged knobTilta Nucleus-M FIZ Lens Control Motor

    The compact Tilta Nucleus-M FIZ Lens Control Motor features an integrated motor drive, eliminating the space of a separate drive box and enabling a quicker setup. Power the motor using a separately available D-Tap cable and power source, or daisy-chain to another motor using a 7-pin cable.

    The Nucleus-M wireless motor includes a cine standard 0.8 Mod drive gear and a 19mm rod adapter with a bushing for mounting onto a 15mm rod. The motor features automatic or manual calibration, a display window, and high, medium, and low torque settings.

    Features
    • Brushless motor with an integrated motor drive
    • Cine-lens standard 0.8 Mod, 35-tooth, 32-pitch gear
    • Motor clamps onto 19mm or 15mm rods (with included bushing)
    • Power via separately available D-Tap cable or daisy-chain to additional motors
    • Automatic and manual calibration
    • For focus, iris, or zoom control
    • High, medium, and low torque settings
    • Status display window
    Tilta DSLR Lens Follow Focus Adapter

    Use this DSLR Lens Follow Focus Adapter from Tilta to tie around your DSLR lens and control focus with any of Tilta’s follow focus systems such as the Nucleus-Nano or Nucleus-M. The adjustable, zip tie-style adapter ring is made of silicone and plastic and ties around most DSLR lenses. The teeth lock into the follow focus motor’s gear for smooth adjustments.

    Tilta Nucleus-M D-Tap to 7-Pin Motor Power Cable

    This 23″ Nucleus-M D-Tap to 7-Pin Motor Power Cable from Tilta is designed to power your Nucleus-M lens control motor using a D-Tap power source.

    After powering one motor with this cable, other motors may be daisy-chained to each other.

    Tilta Nucleus-M 7-Pin Motor-to-Motor Connection Cable (21.65″)

    The Tilta Nucleus-M 7-Pin Motor-to-Motor Connection Cable is 21.65″ long and provides power and control between two Nucleus-M follow focus motors. Please note, you will still need to power one of the motors via a D-Tap to 7-pin cable, or a 3-pin to 7-pin cable connected to a power source. Neither the motors, power cable, nor power source is included.

    Tilta Nucleus-M Follow Focus Marking Disk

    The Tilta Follow Focus Marking Disk is compatible with the Nucleus-M FIZ hand unit. Use this white plastic disk for creating custom focus marks used for pulling focus.

    Tilta Lanyard for Nucleus-M FIZ Hand Unit

    The Tilta Nucleus-M Lanyard is compatible with the Nucleus-M FIZ control hand unit. Use this strap to carry the control unit around your neck or to drape it from a stand. Lanyard features include a swiveling quick release clip and a wide nylon strap.

    Tilta Nucleus-M Battery Charger

    The Tilta Nucleus-M Battery Charger can charge one to four batteries used in the handset and handles of the Nucleus-M wireless lens control system. This versatile charger can be powered using AC, 5V USB, or 12V vehicle power. Compatible with 18650 lithium-ion and select other batteries, the charger features LED status lights and spring-loading for a secure battery fit.

    Compatible Batteries
    • 26650, 22650
    • 18650, 18490, 18350
    • 17670, 17500
    • 16340, 14500, 10400
    • RCR123
    • NiMH/NiCd: AA, AAA, AAAA, C

    The post Tilta Nucleus-M Partial Kit 4 (WLC-T03-K4) appeared first on Cinegear Amsterdam.

    ]]>         Tilta Nucleus-M Partial Kit 5 (WLC-T03-K5) https://cinegear.nl/tr/urun/tilta-nucleus-m-partial-kit-5-wlc-t03-k5/ Wed, 01 Nov 2023 17:31:26 +0000 https://cinegear.nl/product/tilta-nucleus-m-partial-kit-5-wlc-t03-k5/
  • Nucleus-M Right Handgrip
  • Nucleus-M Left Handgrip
  • ARRI-Standard Rosette Adapters
  • 2 x Nucleus-M FIZ Lens Control Motors
  • 2 x DSLR Lens Follow Focus Adapters
  • D-Tap to 7-Pin Motor Power Cable
  • 7-Pin Motor Power Cable
  • Nucleus-M Battery Charger

    • The post Tilta Nucleus-M Partial Kit 5 (WLC-T03-K5) appeared first on Cinegear Amsterdam.

    ]]>

    The Tilta Nucleus-M Wireless Lens Control System Partial Kit V enables a camera operator to hand-hold their camera and pull focus and iris wirelessly. The kit includes left and right handgrip controllers, ARRI rosette adapters, two Nucleus-M motors, two removable lens belts (DSLR Lens Follow Focus Adapters), two motor power cables, and a battery charger. If you are using a lens that does not have standard cine-style gears, then use the included lens belts to add gears to your lens.

    This partial kit is a dual-axis system, typically controlling focus and iris, but the hand control units will allow you to control an additional motor (not included) for zoom control when using a zoom lens. The system can wirelessly pull focus from up to 1000′ away, and available 18650 batteries (not included) can power each hand unit for approximately 10 hours on a single charge. The first motor is powered via the included D-Tap to 7-pin cable, the second motor daisy-chains to the fist via the 7-pin to 7-pin cable for power.

    Tilta Nucleus-M Handgrip (Left)

    The Tilta left-side Wireless Handgrip provides fingertip lens control while also functioning as a handgrip support for your camera rig. This component of the separately available Nucleus-M FIZ (focus/iris/zoom) system enables you to split control between the handgrip and the hand unit as you prefer.

    With a wireless control range of up to 1000′, the Wireless Handgrip can be used for drone or car-mounted shots in addition to handheld configurations. Mount the handgrip using its ARRI-style rosette or use an optional adapter to mount to your gimbal. Use this grip with a separately available right-side grip for full focus, iris, and zoom control of cine-style lenses.

    Handgrip features include three knob-rotation settings, optional adapters for either bar- or ring-based gimbals, LED indicators, and an LCD display. An optional thumb joystick is available separately for the left handgrip. Powered by two 18650 lithium-ion batteries (not included), the handgrips can maintain a single charge for up to two days. As part of the Nucleus-M system, the Wireless Handgrip provides a run/stop function for select cameras.

    Features
    • Customizable focus, iris, and zoom control
    • Run/stop control for select cameras
    • ARRI-style rosette mounting and optional gimbal adapter mounts
    • 1000′ wireless control range
    • 85, 180, and 310° knob rotation settings
    • LCD display and LED indicators
    Tilta Nucleus-M Handgrip (Right)

    The Tilta right-side Wireless Handgrip provides fingertip lens control while also functioning as a handgrip support for your camera rig. This component of the separately available Nucleus-M FIZ (focus/iris/zoom) system enables you to split control between the handgrip and the hand unit as you prefer.

    With a wireless control range of up to 1000′, the Wireless Handgrip can be used for drone or car-mounted shots in addition to handheld configurations. Mount the handgrip using its ARRI-style rosette or use an optional adapter to mount to your gimbal. Use this grip with a separately available left-side grip for full focus, iris, and zoom control of cine-style lenses.

    Handgrip features include three knob-rotation settings, optional adapters for either bar- or ring-based gimbals, LED indicators, and an LCD display. Powered by two 18650 lithium-ion batteries (not included), the handgrips can maintain a single charge for up to two days. As part of the Nucleus-M system, the Wireless Handgrip provides a run/stop function for select cameras.

    Features
    • Customizable focus, iris, and zoom control
    • Run/stop control for select cameras
    • ARRI-style rosette mounting and optional gimbal adapter mounts
    • 1000′ wireless control range
    • 85, 180, and 310° knob rotation settings
    • LCD display and LED indicators
    Tilta Nucleus-M FIZ Lens Control Motor

    The compact Tilta Nucleus-M FIZ Lens Control Motor features an integrated motor drive, eliminating the space of a separate drive box and enabling a quicker setup. Power the motor using a separately available D-Tap cable and power source, or daisy-chain to another motor using a 7-pin cable.

    The Nucleus-M wireless motor includes a cine standard 0.8 Mod drive gear and a 19mm rod adapter with a bushing for mounting onto a 15mm rod. The motor features automatic or manual calibration, a display window, and high, medium, and low torque settings.

    Features
    • Brushless motor with an integrated motor drive
    • Cine-lens standard 0.8 Mod, 35-tooth, 32-pitch gear
    • Motor clamps onto 19mm or 15mm rods (with included bushing)
    • Power via separately available D-Tap cable or daisy-chain to additional motors
    • Automatic and manual calibration
    • For focus, iris, or zoom control
    • High, medium, and low torque settings
    • Status display window
    Tilta DSLR Lens Follow Focus Adapter

    Use this DSLR Lens Follow Focus Adapter from Tilta to tie around your DSLR lens and control focus with any of Tilta’s follow focus systems such as the Nucleus-Nano or Nucleus-M. The adjustable, zip tie-style adapter ring is made of silicone and plastic and ties around most DSLR lenses. The teeth lock into the follow focus motor’s gear for smooth adjustments.

    Tilta Nucleus-M D-Tap to 7-Pin Motor Power Cable

    This 23″ Nucleus-M D-Tap to 7-Pin Motor Power Cable from Tilta is designed to power your Nucleus-M lens control motor using a D-Tap power source.

    After powering one motor with this cable, other motors may be daisy-chained to each other.

    Tilta Nucleus-M 7-Pin Motor-to-Motor Connection Cable (21.65″)

    The Tilta Nucleus-M 7-Pin Motor-to-Motor Connection Cable is 21.65″ long and provides power and control between two Nucleus-M follow focus motors. Please note, you will still need to power one of the motors via a D-Tap to 7-pin cable, or a 3-pin to 7-pin cable connected to a power source. Neither the motors, power cable, nor power source is included.

    Tilta ARRI-Standard Rosette Adapters for Nucleus-M Handgrip (L&R)

    This set of two ARRI-Standard Rosette Adapters from Tilta is used to mount your Nucleus-M lens control handgrips onto standard ARRI rosettes. Both right and left adapters are included in the set.

    Tilta Nucleus-M Battery Charger

    The Tilta Nucleus-M Battery Charger can charge one to four batteries used in the handset and handles of the Nucleus-M wireless lens control system. This versatile charger can be powered using AC, 5V USB, or 12V vehicle power. Compatible with 18650 lithium-ion and select other batteries, the charger features LED status lights and spring-loading for a secure battery fit.

    Compatible Batteries
    • 26650, 22650
    • 18650, 18490, 18350
    • 17670, 17500
    • 16340, 14500, 10400
    • RCR123
    • NiMH/NiCd: AA, AAA, AAAA, C

    The post Tilta Nucleus-M Partial Kit 5 (WLC-T03-K5) appeared first on Cinegear Amsterdam.

    ]]>         SmallRig 3918 Magicfiz Wireless Follow Focus Two Motor Kit https://cinegear.nl/tr/urun/smallrig-3918-magicfiz-wireless-follow-focus-two-motor-kit/ Fri, 05 May 2023 14:06:21 +0000 https://cinegear.nl/product/smallrig-3918-magicfiz-wireless-follow-focus-two-motor-kit/
  • Professional Lens Control:
    • Remotely control lens focus, iris, or zoom at long distances up to 100m.
    • Utilizes an electronic control module, a wireless handgrip, a handwheel controller, and two high-torque focus motors.
    • Flexible combinations for hand-held, over-the-shoulder shooting, and monitoring solutions.
  • Handwheel Controller:
    • Connects to the wireless receiver motor for fine focus control.
    • Built-in 1400mAh battery lasting 20 hours (40 hours with wireless handgrip).
    • Power failure memory function for recalibration, A-B point settings, low-power 0.96" OLED display, replaceable marking disk, and vibration warning.
  • Wireless Handgrip:
    • Fits well with the handwheel controller for dual motor control.
    • Enables camera start/stop control with an optional cable.
    • Mountable for right- or left-hand configurations with included handgrip adapter.
    • Powered by a separately available LP-E6 battery and can power the receiver motor via USB-C cable.
  • Two Wireless Receiver Motors:
    • Compatible with the handgrip and handwheel controller.
    • Features a clear 0.5" OLED display providing calibration data.
    • Standard 0.8 MOD cine gear fits a wide variety of DSLR and cine lenses.
    • Strong torque up to 0.5 Nm when powered by a PD power source.

    • The post SmallRig 3918 Magicfiz Wireless Follow Focus Two Motor Kit appeared first on Cinegear Amsterdam.

    ]]>     SmallRig MagicFIZ Wireless Follow Focus Two Motor Kit (3918)

    The SmallRig MagicFIZ Wireless Follow Focus Two Motor Kit (3918) is meticulously designed to offer precise follow focus solutions for solo photographers or photography teams engaged in hand-held, over-the-shoulder shooting, and monitoring. This comprehensive kit includes a Wireless Handwheel Controller, Wireless Handgrip, Electronic Controller Module, two Wireless Receiver Motors, and various accessories for versatile shooting scenarios.

    Key Features:

    1. Wireless Handwheel Controller:
      • 1400mAh battery with up to 40 hours of usage when working with the Wireless Handgrip.
      • Power-failure memory function avoids repeated lens calibration and AB point settings.
      • Ultra-low-power 0.96″ OLED screen with RGB lighting effect and vibration warning.
    2. Wireless Handgrip (ID: 3780):
      • Enables dual control of Wireless Receiver Motors with the Wireless Handwheel Controller.
      • Supports single-channel wireless and cabled control of Wireless Receiver Motors via the electronic control module.
    3. Wireless Receiver Motors:
      • Supports fast charging with 9V/18W and 0.5N.m torque output.
      • Power options: NP-F batteries (via Battery Plate ID: 3777) or V-Mount batteries (via D-Tap to USB-C Cable ID: 3266 and DC to USB-C cable ID: 3268).
      • Remote control range of up to 100m in open areas.
      • BLE module for wireless REC start/stop, also achievable with control cables (ID: 3325, 2971, 2970).
    4. Compatibility:
      • Compatible with Φ49/Φ52/55/58/62/Φ67/72/77/82/86/80/85/90/95/114mm DSLR and cine lenses.
      • Supports Φ15 rail support systems and M0.8 lens and follow focus gear rings.
      • Incompatible with non-SmallRig wireless follow focus systems.
    5. Additional Accessories:
      • NATO rail and ARRI rosette for flexible mounting options.
      • Shoulder rig adapter, handgrip adapter, and monitor adapter (ID: 4092) for versatile shooting scenarios.
      • Includes Φ15 Rod, Rod Clamp with NATO rail, Snap-on Follow Focus Gear Ring, USB-C to USB-C Cable, Follow Focus Marking Disk (Silicone), Spanner, and User Manual.
      • Carrying Bag for convenient transport.

    Designers: Victor Tang, Peiwen He, Fox Ma

    In the Box:

    1. 1 x Wireless Handwheel Controller
    2. 1 x Wireless Handgrip
    3. 1 x Electronic Controller Module
    4. 2 x Wireless Receiver Motor
    5. 2 x Battery Plate
    6. 1 x Handgrip Adapter
    7. 1 x Shoulder Rig Adapter
    8. 1 x Monitor Adapter
    9. 1 x Φ15 Rod
    10. 1 x Rod Clamp with NATO rail
    11. 1 x Snap-on Follow Focus Gear Ring
    12. 1 x USB-C to USB-C Cable
    13. 1 x Follow Focus Marking Disk (Silicone)
    14. 1 x Spanner
    15. 1 x User Manual
    16. 1 x Carrying Bag

    Product Specifications:

    • Product Dimensions (Wireless Handwheel Controller): 77 x 69 x 54.7 mm
    • Product Dimensions (Wireless Handgrip): 114 x 73 x 33.5 mm
    • Product Dimensions (Electronic Controller Module): 64.5 x 27 x 35 mm
    • Product Dimensions (Wireless Receiver Motor): 105 x 48.5 x 32.5 mm
    • Package Dimensions: 255 x 230 x 90 mm
    • Product Weight: 851g±5g
    • Package Weight: 1451g±5g
    • Material(s): AL6061, ABS, PC, 304 Stainless Steel, Silicone

    The SmallRig MagicFIZ Wireless Follow Focus Two Motor Kit delivers precision, efficiency, and versatility for your follow focus needs in various shooting scenarios.

    The post SmallRig 3918 Magicfiz Wireless Follow Focus Two Motor Kit appeared first on Cinegear Amsterdam.

    ]]>         SmallRig 3781 Magicfiz Wireless Follow Focus Basic Kit https://cinegear.nl/tr/urun/smallrig-3781-magicfiz-wireless-follow-focus-basic-kit/ Fri, 05 May 2023 14:06:20 +0000 https://cinegear.nl/product/smallrig-3781-magicfiz-wireless-follow-focus-basic-kit/
  • 100m Smooth Focus Control:
    • Provides stable wireless lens control up to 100m.
    • Quick channel switching with 16 channels for enhanced anti-interference performance.
  • Versatile Shooting Scenarios:
    • Unique modular design for comprehensive lens control in various scenarios.
    • Suitable for both one-man crew and teamwork.
    • Expandable with wireless handgrip (ID: 3917), motor (ID: 3263), control cables, and other Eco-accessories for multi-scene shooting.
  • One-Click Lens Calibration:
    • Handwheel controller with power failure memory function for saving recalibration and A-B point settings.
    • Allows run/stop control on your camera with an optional cable.
  • All-Day Battery Life:
    • Built-in battery with three power supply options for an all-day battery life.
    • Handwheel controller features a built-in 1400mAh battery lasting up to 20 hours.
  • User-friendly OLED Screen:
    • Controller features an ultra-low-power yet clear 0.96" OLED screen with RGB lighting effect and vibration warning.
    • Motor features a 0.52" OLED display providing calibration data.

    • The post SmallRig 3781 Magicfiz Wireless Follow Focus Basic Kit appeared first on Cinegear Amsterdam.

    ]]>     SmallRig MagicFIZ Wireless Follow Focus Basic Kit (3781)

    The SmallRig MagicFIZ Wireless Follow Focus Basic Kit (3781) is meticulously designed to deliver a precise and low-latency follow focus experience, enhancing your video shooting capabilities. This basic kit includes a Wireless Handwheel Controller, Wireless Receiver Motor, Battery Plate, Handgrip Adapter, and various accessories, offering a modular and high-precision solution for handheld, head, tripod shooting, and director monitoring.

    Key Features:

    1. Wireless Handwheel Controller:
      • 1400mAh battery with a battery life of approximately 20 hours.
      • Power-failure memory function for avoiding repeated lens calibration and AB point settings.
      • Ultra-low-power 0.96″ OLED screen with RGB lighting effect and vibration warning.
    2. Wireless Receiver Motor:
      • Supports fast charging with 9V/18W and 0.5N.m torque output.
      • Power options: NP-F batteries (via Battery Plate ID: 3777) or V-Mount batteries (via D-Tap to USB-C Power Cable ID: 3266 and DC to USB-C Power Cable ID: 3268).
      • Remote control range of up to 100m in open areas.
    3. Compatibility:
      • Compatible with Φ49/Φ52/55/58/62/Φ67/72/77/82/86/80/85/90/95/114mm DSLR and cine lenses.
      • Supports Φ15 rail support systems and M0.8 lens and follow focus gear rings.
      • Incompatible with non-SmallRig wireless follow focus systems.
      • Compatible with NP-F batteries and cameras with REC function.
    4. Additional Accessories:
      • Handgrip Adapter, Φ15 Rod, Rod Clamp with NATO rail, Snap-on Follow Focus Gear Rings, USB-C to USB-C Cable, Follow Focus Marking Disk (Silicone), Spanner, User Manual, and Carrying Bag.

    In the Box:

    1. 1 x Wireless Handwheel Controller
    2. 1 x Wireless Receiver Motor
    3. 1 x Battery Plate
    4. 1 x Handgrip Adapter
    5. 1 x Φ15 Rod
    6. 1 x Rod Clamp with NATO rail
    7. 2 x Snap-on Follow Focus Gear Rings
    8. 1 x USB-C to USB-C Cable
    9. 1 x Follow Focus Marking Disk (Silicone)
    10. 1 x Spanner
    11. 1 x User Manual
    12. 1 x Carrying Bag

    Product Specifications:

    • Product Dimensions (Wireless Handwheel Controller): 77 x 69 x 54.7 mm
    • Product Dimensions (Wireless Receiver Motor): 105 x 48.5 x 32.5 mm
    • Package Dimensions: 212 x 202 x 95mm
    • Product Weight: 493g±5g
    • Package Weight: 1103g±5g
    • Material(s): AL6061, ABS, PC, Silicone

    The SmallRig MagicFIZ Wireless Follow Focus Basic Kit offers a modular and efficient solution for achieving precise and stable focus in various shooting scenarios.

    The post SmallRig 3781 Magicfiz Wireless Follow Focus Basic Kit appeared first on Cinegear Amsterdam.

    ]]>