This Zeapon P1 Motorized Module Shutter Cable for Panasonic And Leica Camera allows users to remote control their camera via smart app.

This cable works with the following cameras:

For Panasonic：

DMC-FZ200/20/150/20K/20S/30/30S/50K/50S/50/100、DMC-GH5/GH4/GH3、DMC-GX7、LC-1, L1, L-10, DMC-G1/G2/G3/G10、DMC-GH1/GH2、DMC-GF1

For Leica

DIGILUX3、DIGILUX2、V-LUX1、V-LUX2

The post Zeapon shutter release Cable Panasonic / Leica P1 appeared first on Cinegear Amsterdam.

This adapter is designed to reach infinity focus while retaining the proper registration distance for maintaining optical quality when you are using vintage and modern lenses or other lenses with floating elements.

Because your camera’s body cap cannot attach to the lens adapter, a rigid-and-removable locking dust cover is provided that allows you to disconnect your lens, leave the adapter mounted, and keep your camera’s sensor protected during transportation. Additionally, a removable Arca-type tripod foot is included for use with heavier lenses.  Fine-tuning and adjustments are made possible with the supplied set of shims.

The post Simmod ARRI PL – L MOUNT CINE PRO Lens Adapter appeared first on Cinegear Amsterdam.

The presented 8Sinn Lens Adapter Support is designed specifically for the 8Sinn Leica SL2/SL2-S cage. Its function is to hold the Evolution L-Mount to PL steady in place. It is mounted to the 8Sinn cage with four M4 mounting points. Thanks to its small size, it supports the Evolution without adding extra weight to the camera rig.

Dimensions: Height: 13,5mm, Length: 22mm, Width: 45mm; Weight: 13g
Set includes: 1pc 8Sinn Lens Adapter Support for Evolution L-Mount to PL to 8Sinn Cage for Leica SL2/SL2-S

The post 8Sinn Lens Adapter Support for Evolution L-Mount to PL to 8Sinn Cage for Leica SL2 / SL2-S appeared first on Cinegear Amsterdam.

The presented 8Sinn HDMI & USB C protective cable clamp is designed specifically for the 8Sinn Leica SL2 / SL2-S cage. Its job is to keep the cables stable when they are plugged into the camera and prevent accidental disconnection. The cable clamp comes with four M4 mounting screws. Two of those are used to mount the cable clamp to the cage and the other two to set how tight the cables are to be clamped.

Compatibility: 8Sinn Cage for Leica SL2 / SL2-S
Dimensions: Height: 53mm, Length: 17mm, Width: 35; Weight: 35g
Set includes: 1pc 8Sinn HDMI & USB C Cable Clamp for 8Sinn Cage for Leica SL2 / SL2-S

The post 8Sinn HDMI&USB C Cable Clamp for 8Sinn Cage for Leica SL2 / SL2-S appeared first on Cinegear Amsterdam.

8Sinn comes with a cage solution for the Leica SL2 and Leica SL2-S. The cage was designed to improve the camera functionality. It’s simple but has just the right amount of mounting options to meet the needs of filmmakers. It’s covered with 1/4” mounting points. There are 3/8” mounting points with Arri locating pins – on the top, bottom and right side of the cage. M4 mounting points are located on the front of the cage, as well as on its side. There is a cold shoe mount for additional attachment and a strap holder. The cage is designed to fit the camera as closely as possible without interfering with its features.

8Sinn Top Handle Scorpio is aluminum made and it will stand the test of time. In this matter, the range of camera accessories that can be attached to it, is enormous. Furthermore, 8Sinn has redesigned the main mounting bracket to fit the 8Sinn Arri Rosette, 8Sinn Arri NATO Rosette, as well as the third-party products. No matter which mounting option you choose, the 8Sinn Top Handle Scorpio is the perfect handle choice for your production. What’s more, the following handle is equipped with cold shoe mounts and a rod opening to allow you to expand even more.

Set includes: 1pc 8Sinn Cage for Leica SL2 / SL2-S; 1pc 8Sinn Top Handle Scorpio; 1pc 8Sinn Arri Rosette 28mm mount

The post 8Sinn Cage for Leica SL2 / SL2-S + 8Sinn Top Handle Scorpio (Include 8-AR28MMM) appeared first on Cinegear Amsterdam.

8Sinn comes with a cage solution for the Leica SL2 and Leica SL2-S. The cage was designed to improve the camera functionality. It’s simple but has just the right amount of mounting options to meet the needs of filmmakers. It’s covered with 1/4” mounting points. There are 3/8” mounting points with Arri locating pins, one each on the top, bottom and right side of the cage. M4 mounting points are located on the front of the cage, as well as on its side. There is a cold shoe mount for additional attachment and a strap holder. The cage is designed to fit the camera as closely as possible without interfering with its features.

8Sinn Top Handle Pro is an aluminum-made camera handle. Having it attached to your camera gives you a safe way of grabbing your setup and, what’s more important, provides various mounting points and adjusting possibilities. The handle is equipped with the quick-release system, which grants quick shifting and detaching it from the cage. This handle can be mounted on every surface equipped with at least 2 x 1/4″ threaded mounting points or on a built-in Safety NATO Rail.

Set includes: 1pc 8Sinn Cage for Leica SL2 / SL2-S; 1pc 8Sinn Top Handle Pro; 1pc 8Sinn Safety NATO Rail 60mm

The post 8Sinn Cage for Leica SL2 / SL2-S + 8Sinn Top Handle Pro (inlude SNR60MM) appeared first on Cinegear Amsterdam.

8Sinn comes with a cage solution for the Leica SL2 and Leica SL2-S. The cage was designed to improve the camera functionality. It’s simple but has just the right amount of mounting options to meet the needs of filmmakers. It’s covered with 1/4” mounting points. There are 3/8” mounting points with Arri locating pins – on the top, bottom and right side of the cage. M4 mounting points are located on the front of the cage, as well as on its side. There is a cold shoe mount for additional attachment and a strap holder. The cage is designed to fit the camera as closely as possible without interfering with its features.

8Sinn Black Crow Top Handle is a new camera handle solution from 8Sinn. It is inspired by the 8Sinn Black Raven Top Handle, yet with a slightly modified design. The mounting system here is Safety NATO Rail based. Thanks to this, it gives the ability of left-right adjustment. The handle is mounted on the NATO Rail and tightened with a thumbscrew. It offers 1/4” mounting points on the top and the bottom, two 3/8” mounting points with Arri locating points and a cold shoe mount.

Set includes: 1pc 8Sinn Cage for Leica SL2 / SL2-S; 1pc 8Sinn Black Crow Top Handle; 1pc 8Sinn Safety NATO Rail 60mm

The post 8Sinn Cage for Leica SL2 / SL2-S + 8Sinn Black Crow Top Handle (inlude SNR60MM) appeared first on Cinegear Amsterdam.

8Sinn comes with a cage solution for the Leica SL2 and Leica SL2-S. The cage was designed to improve the camera functionality. It’s simple but has just the right amount of mounting options to meet the needs of filmmakers. It’s covered with 1/4” mounting points. There are 3/8” mounting points with Arri locating pins – on the top, bottom and right side of the cage. M4 mounting points are located on the front of the cage, as well as on its side. There is a cold shoe mount for additional attachment and a strap holder. The cage is designed to fit the camera as closely as possible without interfering with its features.

8Sinn Black Raven Top Handle provides fresh designing approach with proven solutions all over it. Arri standard locating pins with the 3/8″ mounting screw in the middle guarantees safe and steady handle-to-cage attachment plus adjustment. Besides that, the users can find the usual 1/4″ threads on top and the cold shoe mount at the front-top. Simple, but still functional top handle for handheld shots and lightweight setups.

Set includes: 1pc 8Sinn Cage for Leica SL2 / SL2-S; 1pc 8Sinn Black Raven Top Handle

The post 8Sinn Cage for Leica SL2 / SL2-S + 8Sinn Black Raven Top Handle appeared first on Cinegear Amsterdam.