Handgrip | Cinegear Amsterdam

Tilta Professional handgrips side arms (pair)

Webmaster — Wed, 01 Nov 2023 17:32:24 +0000

Foam-Covered Grip for Shoulder Rig
Integrated Adjustable Extender Arm
ARRI Rosette on Each End of Extender Arm
Arm Extends from 6 to 8.1"
Thumbscrews for Easy Tightening

The post Tilta Professional handgrips side arms (pair) appeared first on Cinegear Amsterdam.

Tilta Nucleus-M Partial Kit 2 (WLC-T03-K2)

Webmaster — Wed, 01 Nov 2023 17:31:26 +0000

The Tilta Nucleus-M Wireless Lens Control System Partial Kit II contains the essential elements for pulling focus wirelessly while handholding. The kit includes the Nucleus-M right handgrip controller, one Nucleus-M motor, one removable lens belt, two motor power cables, and a battery charger unit (batteries not included). The handgrip controller provides wireless fingertip lens control while functioning as handgrip support for your camera rig, and the system enables pulling either focus, iris, or zoom on your lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belt to add gears to your lens.

This partial kit is a single axis system, but the Nucleus-M right handgrip controller will allow you to control additional motors (not included) so you can control more than one lens ring. The included motor power cables allow you to power a motor from either a D-Tap power source or a second motor via the 7-pin to 7-pin connector. The included power cables allow you to easily add a second motor (not included) to the system. The included rosettes aid in mounting the handgrip controller to your camera or rig with ARRI-style rosettes. The system can wirelessly pull focus from up to 1000′ away, and with separately available batteries you can power the hand unit for approximately 10 hours on a single charge.

Tilta Nucleus-M Handgrip (Right)

The Tilta right-side Wireless Handgrip provides fingertip lens control while also functioning as a handgrip support for your camera rig. This component of the separately available Nucleus-M FIZ (focus/iris/zoom) system enables you to split control between the handgrip and the hand unit as you prefer.

With a wireless control range of up to 1000′, the Wireless Handgrip can be used for drone or car-mounted shots in addition to handheld configurations. Mount the handgrip using its ARRI-style rosette or use an optional adapter to mount to your gimbal. Use this grip with a separately available left-side grip for full focus, iris, and zoom control of cine-style lenses.

Handgrip features include three knob-rotation settings, optional adapters for either bar- or ring-based gimbals, LED indicators, and an LCD display. Powered by two 18650 lithium-ion batteries (not included), the handgrips can maintain a single charge for up to two days. As part of the Nucleus-M system, the Wireless Handgrip provides a run/stop function for select cameras.

Features

Customizable focus, iris, and zoom control
Run/stop control for select cameras
ARRI-style rosette mounting and optional gimbal adapter mounts
1000′ wireless control range
85, 180, and 310° knob rotation settings
LCD display and LED indicators

Tilta Nucleus-M FIZ Lens Control Motor

The compact Tilta Nucleus-M FIZ Lens Control Motor features an integrated motor drive, eliminating the space of a separate drive box and enabling a quicker setup. Power the motor using a separately available D-Tap cable and power source, or daisy-chain to another motor using a 7-pin cable.

The Nucleus-M wireless motor includes a cine standard 0.8 Mod drive gear and a 19mm rod adapter with a bushing for mounting onto a 15mm rod. The motor features automatic or manual calibration, a display window, and high, medium, and low torque settings.

Features

Brushless motor with an integrated motor drive
Cine-lens standard 0.8 Mod, 35-tooth, 32-pitch gear
Motor clamps onto 19mm or 15mm rods (with included bushing)
Power via separately available D-Tap cable or daisy-chain to additional motors
Automatic and manual calibration
For focus, iris, or zoom control
High, medium, and low torque settings
Status display window

Tilta DSLR Lens Follow Focus Adapter

Use this DSLR Lens Follow Focus Adapter from Tilta to tie around your DSLR lens and control focus with any of Tilta’s follow focus systems such as the Nucleus-Nano or Nucleus-M. The adjustable, zip tie-style adapter ring is made of silicone and plastic and ties around most DSLR lenses. The teeth lock into the follow focus motor’s gear for smooth adjustments.

Tilta Nucleus-M D-Tap to 7-Pin Motor Power Cable

This 23″ Nucleus-M D-Tap to 7-Pin Motor Power Cable from Tilta is designed to power your Nucleus-M lens control motor using a D-Tap power source.

After powering one motor with this cable, other motors may be daisy-chained to each other.

Tilta Nucleus-M 7-Pin Motor-to-Motor Connection Cable (21.65″)

The Tilta Nucleus-M 7-Pin Motor-to-Motor Connection Cable is 21.65″ long and provides power and control between two Nucleus-M follow focus motors. Please note, you will still need to power one of the motors via a D-Tap to 7-pin cable, or a 3-pin to 7-pin cable connected to a power source. Neither the motors, power cable, nor power source is included.

Tilta ARRI-Standard Rosette Adapters for Nucleus-M Handgrip (L&R)

This set of two ARRI-Standard Rosette Adapters from Tilta is used to mount your Nucleus-M lens control handgrips onto standard ARRI rosettes. Both right and left adapters are included in the set.

The post Tilta Nucleus-M Partial Kit 2 (WLC-T03-K2) appeared first on Cinegear Amsterdam.

SmallRig 3954 Wireless Control Dual Handgrip For DJI RS Series

Webmaster — Fri, 05 May 2023 14:05:59 +0000

SmallRig Wireless Control Dual Handgrip for DJI RS Series 3954

The SmallRig Wireless Control Dual Handgrip for DJI RS Series 3954 is compatible with DJI RS 2 and RS 3 Pro gimbals. It supports various functions such as videoing, photographing, joystick control, mode switching, centering, locking, and sleep mode from a distance of up to 100 meters with a delay of less than 50ms, showcasing excellent anti-interference capabilities. With a battery life of 10 hours, it provides sufficient power for extended shooting sessions.

Key Features:

Remote Control Functions:
- Videoing, Photographing, Joystick Control, Mode Switching, Centering, Locking, Sleep Mode, etc.
Modular Design:
- Quick and easy installation with NATO rail.
Bi-Directional Magnetic Attraction:
- Reliable and firm installation with proper magnetic force and a four-way limit.
Dual NATO Rail:
- Allows inversion for underslung mode and sideways adjustment for the right grip width.
Versatile Mounting Options:
- NATO rails feature 1/4″-20 and ARRI 3/8″-16 threaded holes for accessories like Monitor Mount 2115, cold shoe mount for Monitor Mount 2905, Wireless Go, microphone, etc.
Extended Shooting Time:
- Compatible with 3252 and Battery Plate 2988 for extended shooting time in inverted mode.
Multiple Threaded Holes:
- 1/4″-20 threaded holes, ARRI 3/8″-16 locating holes, and a cold shoe mount on handgrips.
Receiver Features:
- Made of aluminum alloy, matching DJI RS stabilizers in appearance.
- NATO clamp, two M4 screws, and locking knob for stability.

Specifications:

Max Payload: 8kg
Max Payload of Receiver: 4kg

Note:

Not dustproof or waterproof.
Do not drop or hit it.
Using it in an enclosed space may lead to product failure.
Keep it away from flammable or corrosive liquids.
Disassembling it by yourself may lead to product failure.

Compatibility: DJI RS 2, DJI RS 3 Pro

In the Box:

1 x Wireless Control Dual Handgrip
1 x USB-A to USB-C Cable (70cm)
1 x Receiver
1 x User Manual

Product Dimensions: 436.5 x 65 x 180 mm
Package Dimensions: 203×143×101mm
Product Weight: 685g±5g
Package Weight: 843g±5g
Material(s): Aluminum Alloy, Silicone

The post SmallRig 3954 Wireless Control Dual Handgrip For DJI RS Series appeared first on Cinegear Amsterdam.

SmallRig 2636 Handgrip For Zhiyun-Tech WeeBill-S Gimbal

Webmaster — Fri, 05 May 2023 14:01:28 +0000

SmallRig Sling Handgrip for ZHIYUN WEEBILL-S Gimbal BSS2636 is designed to reduce arm fatigue and provide some extra accessory mounts when shooting with your WEEBILL-S. This ergonomic handle allows you to shoot from a variety of angles, including high- or low-angle shots. Featuring multiple 1/4″-20, 3/8″-16, and ARRI-style accessory threads, as well as a shoe mount on one end for mounting additional accessories, such as Magic Arm 2115 and Monitor Mount 2346. The handgrip is equipped with a 1/4″-20 thumbscrew and two locating pins for a secure, anti-twist connection to your gimbal. Rubber padding on the top protects your gimbal from scratches.
Designer: Tracy Joy

Compatibility:
ZHIYUN WEEBILL-S

Package Includes:
1 x Handgrip

Product Dimensions: 150 x 45 x 28mm
Package Dimensions: 185 x 55 x 55mm
Net Weight: 235g
Package Weight: 272g
Material(s): Aluminum Alloy, Silicone

*Please note the import duty may occur, and it should be on buyer’s side.

The post SmallRig 2636 Handgrip For Zhiyun-Tech WeeBill-S Gimbal appeared first on Cinegear Amsterdam.

SmallRig 2250 Dual Handgrip For DJI Ronin S Gimbal

Webmaster — Fri, 05 May 2023 14:00:14 +0000

SmallRig Dual Handgrip for DJI Ronin-S and Ronin-SC Gimbal BSS2250 is designed to operate your Ronin-S and Ronin-SC gimbal with both hands to reduce one-handed fatigue. The dual handle attaches to Ronin-S and Ronin-SC via a ratchet knob and features rubber inside of the mounting socket to prevent scratching the Gimbal. The handle is able to take apart into five parts to make it easy to store and make your traveling way easier. Each handle grip features four 1/4-20” threaded holes on the top, one 1/4”-20 and one 3/8”-16 threaded holes on the bottom for accessory attachment such as Cold Shoe 2260 and Magic Arm 2070 for microphone and monitor. The versatile Dual Handgrip can be grasped overhanded, or underhanded for inverted mode. The 25mm handlebar also allows you to attach SmallRig 25mm Mounting Rod Clamp 1860 for accessory attachment. Additionally, the ratchet knob system allows you to adjust the position of the handle on the bar quickly.

The post SmallRig 2250 Dual Handgrip For DJI Ronin S Gimbal appeared first on Cinegear Amsterdam.

PGYTECH Handgrip Mount For DJI RS3/RS3PRO/RS2/RSC2

Webmaster — Fri, 05 May 2023 10:38:39 +0000

The post PGYTECH Handgrip Mount For DJI RS3/RS3PRO/RS2/RSC2 appeared first on Cinegear Amsterdam.

SmallRig 3161 Sling Handgrip For DJI RS 2 And RSC 2 Gimbal

cineadmin1 — Fri, 17 Dec 2021 13:49:07 +0000

SmallRig 3161 Sling Handgrip for DJI RS 2 and RSC 2

The SmallRig 3161 Sling Handgrip for DJI RS 2 and RSC 2 is designed to make shooting from low angles with a gimbal more comfortable. In addition, the handle offers connections for mounting accessories. You attach the handle to the DJI R Briefcase handle with a 1/4''-20 screw. A thumbscrew is included with which you can replace the screw on the Briefcase handle to adjust the angle of the grip without tools.

Mounting points for accessories

The SmallRig 3161 has multiple 1/4''-20 and ARRI 3/8''-16 connections, allowing you to add various accessories to your RS 2 / RSC 2. On the top of the Sling Handgrip is a cold shoe mount.

Features of the SmallRig 3161 Sling Handgrip for DJI RS 2 and RSC 2

Designed for the DJI RS 2/RSC 2 gimbal
Reduces arm fatigue when shooting at low angles
Equipped with 1/4''-20 and 3/8''-16 connectors
Features a cold shoe mount
Built-in allen wrench

Suitable for

DJI RS2
DJI RS2 Pro Combo
DJI RSC 2
DJI RSC 2 Pro Combo

The post SmallRig 3161 Sling Handgrip For DJI RS 2 And RSC 2 Gimbal appeared first on Cinegear Amsterdam.

SmallRig 3027 Dual Handgrip For DJI RS 2/RSC 2

cineadmin1 — Fri, 17 Dec 2021 12:36:04 +0000

SmallRig Dual Handgrip for DJI RS 2/RSC 2 3027 is designed to reduce arm fatigue during shooting and provide rich accessories mounts. It secures to the NATO rail on each side of the gimbal, easy for detachment and time-saving. The handgrip is designed with two-side NATO rails, which is not only horizontal adjustable, but also easy for detachment and support shooting in inverted mode. Built-in multiple 1/4?-20 and ARRI 3/8?-16 threaded holes can attach Magic Arm 2115 for the monitor. Cold shoe ports can be used for Monitor Mount 2905, wireless go, microphone, sound receiver, etc. It disassembles into four part for easy storage and transport.

Compatibility:

DJI RS 2

DJI RSC 2

Packing List:

1 x Dual Handgrip

Product Dimensions: 406 x 155 x 46mm

Package Dimensions: 215 x 115 x 65mm

Net Weight: 551g

The post SmallRig 3027 Dual Handgrip For DJI RS 2/RSC 2 appeared first on Cinegear Amsterdam.

SmallRig 3028 Sling Handgrip For DJI RS 2/RSC 2

cineadmin1 — Fri, 17 Dec 2021 12:29:31 +0000

DJI R Briefcase Handle for the DJI RS(C) 2

With the DJI RS(C) 2 Briefcase Handle it is possible to use the Briefcase mode on the DJI RS(C) 2 stabilizer. The handle is made of high-strength aluminum and is attached with a quick-release system. This makes attachment and disconnection quick and easy.

Attach the handgrip via the rsa or nato connection, after you have balanced your camera on the DJI RS(C) 2 stabilizer. The handle weighs 150 grams and the dimensions are 18 x 6 x 3 centimeters.

Suitable for

DJI RS2
DJI RS2 Pro Combo
DJI RSC 2
DJI RSC 2 Pro Combo

The post SmallRig 3028 Sling Handgrip For DJI RS 2/RSC 2 appeared first on Cinegear Amsterdam.

Tilta UH-T03 Universal Handgrip 15/19mm rod bridge

Thomas — Tue, 10 Mar 2020 10:04:42 +0000

The Tilta Universal Handgrip is a flexible handgrip system that attaches to either 15 mm lightweight or 19mm studio support rods. It consists of a rod bridge and two handgrips.

The post Tilta UH-T03 Universal Handgrip 15/19mm rod bridge appeared first on Cinegear Amsterdam.