The black Tilta Full Camera Cage for BMPCC 6K Pro/G2/BMPCC 6K is a modular, formfitting cage that protects and enables accessory mounting for your camera. This cage features one NATO rail, one single-rod bracket mount, two ARRI-style rosettes, three shoe mounts, and multiple 1/4″-20 and 3/8″-16 threaded mounting holes for accessories. The bottom plate features Arca-style compatibility and multiple mounting holes for attaching to a tripod or gimbal.

This Tilta Quick Release Top Handle, in black, is a durable, sculpted top handle that attaches securely to a cold shoe and provides accessory mounting points, in addition to a top handle grip for your camera. The quick release handle’s features include two cold shoe mounts, one in the front with a spring-loaded safety latch and the second on the back. The handle also features a 15mm rod port and multiple 1/4″-20 and 3/8″-16 threads with and without anti-twist divots.

The aluminum and stainless steel handle attaches to your camera or cage using the included spring-loaded thumbscrew. The 15mm rod port features a locking lever to secure the rod in place. On the front face of the handle, there is a 1/4″-20 threaded mounting hole with anti-twist divots. Multiple 1/4″-20 and 3/8″-16 threaded mounting holes are machined into the top and sides of the handle.

Add rods to your Blackmagic Pocket Cinema Camera 6K Pro and 6K G2 cameras when using the Tilta Half Cage with the extended bottom plate for the Blackmagic Design battery grip, with this black 15mm Rod Holder from Tilta. This rod holder enables you to use cinema-style accessories with your camera, battery grip, half cage setup (cage, extended bottom plate, and battery grip not included), which otherwise would not be possible, as the battery grip would raise the camera too far above the correct lens center-to-rod distance when using standard baseplate rod clamps.

This holder/clamp supports the 15mm LWS standard for rod supports, and it mounts on your cage via the extended bottom plate. The mounting screw attaches the rod holder to the cage, and the two locking pins on the holder interface with the divots on the cage to secure the holder to prevent shifting during use. The rod clamp locking lever is set underneath so that it’s out of the way.

Make it easier to plug in your camera’s HDMI cable when using Tilta’s Blackmagic Design Pocket Cinema Camera 4K cage with this HDMI Right-Angle Adapter. The adapter is designed at a 90° angle and attaches to the corner of the cage with a thumbscrew. This puts the male HDMI type A connector in place to plug into your camera, and the female HDMI type A end remains unimpeded.

The 90° USB Type-C Cable for BMPCC 4K Cage from Tilta is 12″ long and designed to closely fit your Blackmagic Pocket Cinema Camera 4K when mounted on its Tilta cage. Features include right-angle USB Type-C connectors with thumbscrew anchors on each end.

The Tilta Full Camera Cage for RED KOMODO, in black, features connected side panels and a bottom panel, with a top plate that secures directly to the top of the camera and provides a shoe mount and 1/4″-20 threads. The bottom panel of the cage offers multiple 1/4″-20 mounting threads for optimal balancing on gimbals, and the adapter plate also provides 1/4″-20 threads on the bottom. Attach a separately available adapter plate to the bottom panel and mount the cage to the Tilta 15mm LWS Baseplate for RED KOMODO Cage by quick release.

The cage offers 1/4″-20 and 3/8″-16 accessory threads all around and a total of four rosette mounts, two on the left side and two on the right. Optional Tilta accessories for this cage include a NATO-mount wooden handle, rotating top handle, 15mm LWS baseplate, tilting monitor mount, and more.

The Right-Side Wooden Handle Type I, featuring a black base, is designed to attach to the right side of the Tilta cage for the RED Komodo camera via an included NATO rail adapter. The NATO adapter allows for quick release attachment and removal of the wooden, ergonomic handgrip at the flip of a metal lever. A 1/4″-20 mounting thread is additionally provided on the top.

Made of robust aluminum and stainless steel, Tilta’s Adjustable Cold Shoe Accessory Mounting Bracket, in black, is used to attach a monitor or other accessory to a camera’s hot shoe or a camera cage shoe mount. Featuring tension-based tilt adjustment and a separate thumbwheel for the top 1/4″-20 screw and bottom cold shoe, the bracket allows for efficient, tool-free attachment and adjustment of your accessories. The mounting platform is padded and also has an edge lip to better hold your accessory and prevent twisting and scratching.

Build your Tiltaing camera rig with this gray Arca-Swiss-type Tiltaing Arca Quick Release Plate Type II from Tilta. This plate attaches to the bottom of your compatible Tiltaing Sigma fp or Blackmagic Pocket Cinema Camera 4K/6K cage, enabling you to quickly and easily mount and remove the cage from an Arca-Swiss support system.

Build your Tiltaing camera rig with this Tilta Gray Tiltaing Manfrotto-Type Quick Release Plate Type II from Tilta. This plate attaches to the bottom of your compatible Tiltaing Sigma fp or Blackmagic Pocket Cinema Camera 4K/6K cage, enabling you to quickly and easily mount and remove the cage from a Manfrotto-type support system.