Overview

The Manfrotto C50MEJ 2" Micro-End Vice Jaw Clamp is designed for positioning lighting equipment on set, stage, or location. It accommodates round tubes from 0.6 to 2" and has a load capacity of up to 55.1 lb / 25 kg.

The clamp features a chrome-plated steel rod, die-cast aluminum jaws, and red thermoplastic polyurethane liners for traction and to help prevent surface marring. Its anti-jam clamp mechanism is designed to reduce sticking when opening the clamp, while the knurled mounting shaft includes a 1/4"-20 adapter.

Overview

The Manfrotto End Vice Jaw Clamp (2") is designed for positioning lighting equipment on set, stage, or location. Its chrome-plated steel rod and die-cast aluminum jaw set accommodate round tubes up to 2" and provide a load capacity of up to 110 lb.

The jaws feature bright red rubber thermoplastic polyurethane liners for traction and to help prevent marring the attached surface. An anti-jam clamp mechanism is designed to reduce sticking when the clamp is opened from its fully closed position or detached from a mounting point.

Overview

The MID49 DB11 Universal Camera-Mounted Power Distribution Box is designed for Sony FX6 and FX9 camera rigs and uses a V-mount battery plate. It mounts onto third-party rear top plates with 1/4"-20 and/or 3/8"-16 screws.

The unit provides multiple power outputs, including D-Tap, 2-Pin LEMO, 3-Pin Fischer and USB-C PD connections. A 12.5V 4-Pin XLR input supports hot-swapping, while SMART FUSE power management and short-circuit protection are included.

Overview

The MID49 Power Distribution Box DB-13 powers the FUJIFILM GFX ETERNA 55 using standard Gold Mount batteries. A 4-pin XLR DC input supports hot-swapping when connected to a DC input.

The box provides multiple accessory outputs, including USB-C PD, D-Tap, Fischer and LEMO connections. An amp selection switch and Smart Fuse system help manage accessory power, while the detachable LANC cable supports remote camera start and stop control.

Overview

The Avenger D230 Super Clamp Grip Head is designed for hanging flags and scrims in positions that C-stands cannot reach. Its non-slip grip pad locks securely for precision control.

The Super Clamp jaws open up to 2.5" and accept grip arms, studs, or pins with diameters up to 5/8".

Overview

The Avenger Ave Variable Friction Arm is a fully articulated accessory with 90° pivotable and 360° rotatable ends. Its elbow rotates 360° using a rubberized locking T-handle, which allows tension adjustment through partial loosening for positioning a light head or camera.

The arm features 5/8" studs on ball joints at both ends, along with 3/8 and 1/4" female threads. It is compatible with grip equipment featuring 5/8" receivers.

Overview

The Avenger MP Eye Coupler with Lifting Ring is an aluminum grip accessory for mounting on round tubing or pipe with a diameter of 1.65 to 2". It has a load capacity of 661.4 lb / 300 kg and features an integrated eyebolt for hanging equipment with rope, chain, or cable.

Overview

The Avenger E390 TVMP Yoke to Stand Adapter features a threaded bolt and a 5/8" female socket. It adapts light fixture yokes without a stud or socket for mounting to a standard Baby 5/8" light stand.

Overview

The Avenger E600C Snap In Pin features a hexagonal end that snaps into a Super Clamp or similar grip accessory. Its other end accepts a lighting fixture with a 5/8" female receiver.

The pin is fabricated from chrome-plated steel and features a 5/8" hex and 5/8" pin.

Overview

The Avenger E610 Baby Pin is a zinc-plated 5/8" steel stud with a wood screw for direct mounting into a wood surface. It can be mounted permanently or temporarily, while the zinc plating helps prevent corrosion of the steel pin.