Rigs | Cinegear Amsterdam https://cinegear.nl/product-category/cameras/video-monitor/accessoires-video/rigs-accessoires-video/ Wed, 15 Jul 2026 14:35:17 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://cinegear.nl/wp-content/uploads/2019/12/cropped-Transparent_Normal_Logo-1-32x32.jpg Rigs | Cinegear Amsterdam https://cinegear.nl/product-category/cameras/video-monitor/accessoires-video/rigs-accessoires-video/ 32 32 MID49 TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 1/4-20 Spuds https://cinegear.nl/product/mid49-twist-ball-monitor-arm-3-inch-with-arri-1-4-20-arri-1-4-20-spuds/ Tue, 24 Feb 2026 09:30:56 +0000 https://cinegear.nl/?post_type=product&p=120925
  • Two 1" TWIST Ball Mounts
  • 3" Monitor Arm
  • Two 1/4"-20 Spuds
  • Two Variable-Friction 15mm Rod Clamps
  • Two Variable-Friction Speedball Clamps
  • Includes Hook-and-Loop Cable Tie

    • The post MID49 TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 1/4-20 Spuds appeared first on Cinegear Amsterdam.

    ]]>

    Overview

    TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 1/4-20 Spuds is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew.

    Included in this kit are two ARRI 1/4-20, which have removable 3mm locating pins in 10.4mm spacing from center to center. Pins can also be installed with 15mm spacing, which can be found on some random, 3rd party products.

    Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.

    The Speedball Clamp’s “Chip Clip” design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned.

    3-inch arm includes the Speedball Extension, a second Speedball Clamp, and a hook and loop cable tie.

    Specifications

    Top Mount
    15mm Rod Mount
    1/4″-20 Male With Anti-Twist Pin
    Bottom Mount
    3/8″-16 Male With Anti-Twist Pin
    3/8″-16 Male With Anti-Twist Pin
    Points of Articulation
    4
    Segment Length
    3″ / 7.6 cm
    Package Weight
    0.705 lb
    Box Dimensions (LxWxH)
    9.4 x 3.6 x 1.9″

    The post MID49 TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 1/4-20 Spuds appeared first on Cinegear Amsterdam.

    ]]>         MID49 TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 3/8-16 Spuds https://cinegear.nl/product/mid49-twist-ball-monitor-arm-3-inch-with-arri-1-4-20-arri-3-8-16-spuds/ Tue, 24 Feb 2026 09:30:53 +0000 https://cinegear.nl/?post_type=product&p=120924
  • Two 1" TWIST Ball Mounts
  • 3" Monitor Arm
  • 1/4"-20 and 3/8"-16 Spuds
  • Two Variable-Friction 15mm Rod Clamps
  • Two Variable-Friction Speedball Clamps
  • Includes Hook-and-Loop Cable Tie

    • The post MID49 TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 3/8-16 Spuds appeared first on Cinegear Amsterdam.

    ]]>

    Overview

    TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 3/8-16 Spuds is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew.

    Included in this kit is one ARRI 1/4-20, which has removable 3mm locating pins in 10.4mm spacing from center to center. Pins can also be installed with 15mm spacing which can be found on some random, 3rd party products.

    Also included is one ARRI 3/8-16, which has removable 3mm locating pins in 15mm spacing, center to center.

    Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.

    The Speedball Clamp’s “Chip Clip” design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned.

    3-inch arm includes the Speedball Extension, a second Speedball Clamp, and a hook and loop cable tie.

    Specifications

    Top Mount
    15mm Rod Mount
    1/4″-20 Male With Anti-Twist Pin
    Bottom Mount
    1/4″-20 Male With Anti-Twist Pin
    1/4″-20 Male With Anti-Twist Pin
    Points of Articulation
    4
    Segment Length
    3″ / 7.6 cm
    Package Weight
    0.71 lb
    Box Dimensions (LxWxH)
    9.25 x 3.8 x 1.95″

    The post MID49 TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 3/8-16 Spuds appeared first on Cinegear Amsterdam.

    ]]>         MID49 TWIST Ball Monitor Mount with ARRI 1/4″-20 + ARRI 1/4″-20 Spuds https://cinegear.nl/product/mid49-twist-ball-monitor-mount-with-arri-1-4-20-arri-1-4-20-spuds/ Tue, 24 Feb 2026 09:30:51 +0000 https://cinegear.nl/?post_type=product&p=120923
  • Two 1" TWIST Ball Mounts
  • Two 1/4"-20 Spuds
  • Two Variable-Friction 15mm Rod Clamps
  • Variable-Friction Speedball Clamps

    • The post MID49 TWIST Ball Monitor Mount with ARRI 1/4″-20 + ARRI 1/4″-20 Spuds appeared first on Cinegear Amsterdam.

    ]]>

    Overview

    TWIST Ball Monitor Mount with ARRI 1/4-20 + ARRI 1/4-20 Spuds is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew.

    Included in this kit are two ARRI 1/4-20s, which have removable 3mm locating pins in 10.4mm spacing from center to center. Pins can also be installed with 15mm spacing which can be found on some random, 3rd party products.

    Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.

    The Speedball Clamp’s “Chip Clip” design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned.

    Specifications

    Top Mount
    15mm Rod Mount
    1/4″-20 Male With Anti-Twist Pin
    Bottom Mount
    15mm Rod Mount
    1/4″-20 Male With Anti-Twist Pin
    Points of Articulation
    2
    Package Weight
    0.43 lb
    Box Dimensions (LxWxH)
    6.1 x 2.6 x 1.75″

    The post MID49 TWIST Ball Monitor Mount with ARRI 1/4″-20 + ARRI 1/4″-20 Spuds appeared first on Cinegear Amsterdam.

    ]]>         MID49 TWIST Ball Monitor Mount with ARRI 1/4″-20 + ARRI 3/8″-16 Spuds https://cinegear.nl/product/mid49-twist-ball-monitor-mount-with-arri-1-4-20-arri-3-8-16-spuds/ Tue, 24 Feb 2026 09:29:49 +0000 https://cinegear.nl/?post_type=product&p=120922
  • Two 1" TWIST Ball Mounts
  • 1/4"-20 Spud and 3/8"-16 Spud
  • Two Variable-Friction 15mm Rod Clamps
  • Variable-Friction Speedball Clamps

    • The post MID49 TWIST Ball Monitor Mount with ARRI 1/4″-20 + ARRI 3/8″-16 Spuds appeared first on Cinegear Amsterdam.

    ]]>

    Overview

    TWIST Ball Monitor Mount with ARRI 1/4-20 + ARRI 3/8-16 Spuds is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew.

    Included in this kit is one ARRI 1/4-20, which has removable 3mm locating pins in 10.4mm spacing from center to center. Pins can also be installed with 15mm spacing which can be found on some random, 3rd party products.

    Also included is one ARRI 3/8-16, which has removable 3mm locating pins in 15mm spacing, center to center.

    Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.

    The Speedball Clamp’s “Chip Clip” design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned.

    Specifications

    Top Mount
    15mm Rod Mount
    1/4″-20 Male With Anti-Twist Pin
    Bottom Mount
    15mm Rod Mount
    3/8″-16 Male With Anti-Twist Pin
    Points of Articulation
    2
    Package Weight
    0.435 lb
    Box Dimensions (LxWxH)
    6.35 x 3.7 x 1.75″

    The post MID49 TWIST Ball Monitor Mount with ARRI 1/4″-20 + ARRI 3/8″-16 Spuds appeared first on Cinegear Amsterdam.

    ]]>         SmallRig Crab-Shaped Clamp https://cinegear.nl/product/smallrig-crab-shaped-clamp/ Mon, 29 Sep 2025 04:16:50 +0000 https://cinegear.nl/?post_type=product&p=115207
  • Clamps on Surfaces 0.6 to 1.6" Deep
  • 11.4" Magic Arm with Two Segments
  • 180° Mini Ball Head on Both Ends
  • Includes Three-Prong Action Camera Mount
  • Load Capacity up to 3.3 lb
  • 1/4"-20 Mounting Screws
  • Large Tightening Levers

    • The post SmallRig Crab-Shaped Clamp appeared first on Cinegear Amsterdam.

    ]]>     The Crab-Shaped Clamp with Magic Arm and Action Camera Mount from SmallRig lets you mount a 1/4″-20 threaded camera accessory or 3-prong mount action camera on a rod, pipe, tripod leg, or surface measuring 0.6 to 1.6 deep. The kit is made up of a durable crab-style clamp, an adjustable 11.4″ magic arm, and a detachable 3-prong action camera mount.

    Included

    • SmallRig Crab-Shaped Clamp with Magic Arm and Action Camera Mount
    • Crab-Style Clamp
    • Magic Arm
    • 3-Prong Action Camera Mount
    • Limited 2-Year Manufacturer Warranty

    The post SmallRig Crab-Shaped Clamp appeared first on Cinegear Amsterdam.

    ]]>         SmallRig MagSafe-Compatible Crab-Shaped Clamp https://cinegear.nl/product/smallrig-magsafe-compatible-crab-shaped-clamp/ Mon, 29 Sep 2025 04:16:34 +0000 https://cinegear.nl/?post_type=product&p=115206
  • Clamps on Surfaces 0.6 to 1.6" Deep
  • 11.4" Magic Arm with Two Segments
  • 180° Mini Ball Head on Both Ends
  • Includes MagSafe Mount
  • Load Capacity up to 3.3 lb
  • 1/4"-20 Mounting Screws
  • Large Tightening Levers

    • The post SmallRig MagSafe-Compatible Crab-Shaped Clamp appeared first on Cinegear Amsterdam.

    ]]>     The Crab-Shaped Clamp with Magic Arm and MagSafe Mount from SmallRig lets you mount a 1/4″-20 threaded camera accessory or MagSafe-compatible phone or accessory on a rod, pipe, tripod leg, or surface measuring 0.6 to 1.6 deep. The kit is made up of a durable crab-style clamp, an adjustable 11.4″ magic arm, and a detachable MagSafe mount.

    Included

    • SmallRig MagSafe-Compatible Crab-Shaped Clamp
    • Crab-Style Clamp
    • Magic Arm
    • MagSafe Mount
    • Limited 2-Year Manufacturer Warranty

    The post SmallRig MagSafe-Compatible Crab-Shaped Clamp appeared first on Cinegear Amsterdam.

    ]]>         UNBOUND Cinematics Cheeseclamp https://cinegear.nl/product/unbound-cinematics-cheeseclamp/ Wed, 06 Aug 2025 17:33:51 +0000 https://cinegear.nl/?post_type=product&p=112754
  • Multiple attachment points: four 3/8 screw sockets and three 1/4 screw sockets
  • Made of aerospace-grade aluminum

    • The post UNBOUND Cinematics Cheeseclamp appeared first on Cinegear Amsterdam.

    ]]>     The Cheese clamp allows for efficient and convenient mounting of accessories on the Lemsford monitor case without drilling. Simply clamp the product onto any ledge of the case to mount receivers, recording equipment,remotes, and more. The Cheese clamp can remain in the case during transport, fitting perfectly under the lid.

    The post UNBOUND Cinematics Cheeseclamp appeared first on Cinegear Amsterdam.

    ]]>         Nitze Elf Series Monitor Holder (3/8″-16 Arri Locating Pins to 1/4″-20 Screw with ARRI Locating Pins) – N54-G4 https://cinegear.nl/product/nitze-elf-series-monitor-holder-3-8-16-arri-locating-pins-to-1-4-20-screw-with-arri-locating-pins-n54-g4/ Thu, 13 Mar 2025 02:54:45 +0000 https://cinegear.nl/?post_type=product&p=105518
  • ARRI Standard Locating Pins
  • 180° Tilt and 360° Swivel Adjustment
  • Low Profile Design
  • Double Security
  • The Payload of Nitze N54-G4 monitor holder mount is up to 5kg

    • The post Nitze Elf Series Monitor Holder (3/8″-16 Arri Locating Pins to 1/4″-20 Screw with ARRI Locating Pins) – N54-G4 appeared first on Cinegear Amsterdam.

    ]]>

    Features

    • Nitze Elf series N54-G4 monitor holder mount locked by 3/8” ARRI Standard Locating Pins can be mounted to any cages and accessories with 3/8”, ARRI locating hole.
    • The monitor holder mount supports 180° tilt and 360° swivel with free stop. Damping design can be adjusted by screwing and loosing the M4 screws.
    • The Payload of Nitze N54-G4 monitor holder mount is up to 5kg, which meets the needs of almost all monitors on the market.
    • Low profile design keeps the monitor closer to the handle or the camera cage. The rubber pad on the top prevents your monitor from scratching.
    • The holes on the thumbscrew support to be more tightened by using the attached hex spanner after rotating the thumbscrew to lock the monitor.

    Included

    1 x N54-G4 Monitor Holder Mount
    1 x Hex Spanner

    Specifications

    Material
    Aluminum Alloy
    Payload 5 kgs
    Product Weight 82 g
    Product Size 36 x 32 x 62 mm
    Package Weight 109 g
    Package Size 85 x 65 x 40 mm

    The post Nitze Elf Series Monitor Holder (3/8″-16 Arri Locating Pins to 1/4″-20 Screw with ARRI Locating Pins) – N54-G4 appeared first on Cinegear Amsterdam.

    ]]>         Nitze Elf Series Monitor Holder (NATO Clamp to 1/4″-20 Screw with ARRI Locating Pins) – N54-G2 https://cinegear.nl/product/nitze-elf-series-monitor-holder-nato-clamp-to-1-4-20-screw-with-arri-locating-pins-n54-g2/ Thu, 13 Mar 2025 02:54:45 +0000 https://cinegear.nl/?post_type=product&p=105524
  • NATO Clamp
  • 180° Tilt and 360° Swivel Adjustment
  • Low Profile Design
  • Double Security

    • The post Nitze Elf Series Monitor Holder (NATO Clamp to 1/4″-20 Screw with ARRI Locating Pins) – N54-G2 appeared first on Cinegear Amsterdam.

    ]]>

    Features

    NATO Clamp: Nitze Elf series N54-G2 monitor holder mount has interfaced NATO clamp and enclosed a NATO rail which can be used to mount accessories you want.

    180° Tilt and 360° Swivel Adjustment: The monitor holder mount supports 180° tilt and 360° swivel with free stop. Damping design can be adjusted by screwing and loosing the M4 screws.

    High Payload: The Payload of Nitze N54-G2 monitor holder mount is up to 5kg, which meets the needs of almost all monitors on the market.

    Low Profile Design: Low profile design keeps the monitor closer to the handle or the camera cage. The rubber pad on the top prevents your monitor from scratching.

    Double Security: The holes on the thumbscrew support to be more tightened by using the attached hex spanner after rotating the thumbscrew to lock the monitor.

    Included

    1 x N54-G2 Monitor Holder Mount
    1 x Hex Spanner

    Specifications

    Material
    Aluminum Alloy
    Payload 5 kgs
    Product Weight 90 g
    Product Size 42 x 25 x 63 mm
    Package Weight 114 g
    Package Size 85 x 65 x 40 mm

    The post Nitze Elf Series Monitor Holder (NATO Clamp to 1/4″-20 Screw with ARRI Locating Pins) – N54-G2 appeared first on Cinegear Amsterdam.

    ]]>         Nitze Field Monitor Mount + Tilt – Nato To 1/4 (N54-F5) https://cinegear.nl/product/nitze-field-monitor-mount-tilt-nato-to-1-4-n54-f5/ Thu, 13 Mar 2025 02:54:45 +0000 https://cinegear.nl/?post_type=product&p=105545
  • High Payload Capability
  • Tilt and Swivel Adjustment
  • Free Stop
  • Rubber Pad
  • Securely Locking

    • The post Nitze Field Monitor Mount + Tilt – Nato To 1/4 (N54-F5) appeared first on Cinegear Amsterdam.

    ]]>
  • The payload of Nitze Elf series N54-F5 monitor holder mount is up to 5 KG. It can firmly fix the monitors from 5” to 7”.
  • The monitor holder mount supports 180° tilt and 360° swivel. Tilt or swivel damping can be adjusted through the M4 screws with the included hex spanner.
  • It supports free stop at any position without worrying about the monitor falling.
  • The rubber pad on the top can effectively prevent friction and scratching with the monitor or monitor cage.
  • The monitor mount is conveniently locked by turning the built-in thumbscrew. The holes on the thumbscrews allow the monitor mount to be more tightened with the included hex spanner.

    • The post Nitze Field Monitor Mount + Tilt – Nato To 1/4 (N54-F5) appeared first on Cinegear Amsterdam.

    ]]>