Overview

Note that this is the same lens height as the version for the Canon C50, however, this assembly has a shorter thumbscrew and safety button to allow the Nikon battery and memory card to be changed without removing the baseplate.

ARRI dovetail slot on the bottom attaches using a top-load locking mechanism to the included Baseline ARRI Dovetail or other ARRI standard dovetails.

Loosen the thumbscrew and push the silver button on the operator’s side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew.

ARCA dovetail slot on top holds Baseline ARCA Dovetails and can be top-loaded, or installed from the back by sliding in. When sliding in from the back, a safety pin will engage with a pop when properly installed. Adjust the position, then lock the ratcheting thumbscrew. Top-loading can be achieved by loosening the thumbscrew, pulling out on the ratcheting knob, and turning the thumbscrew until the ARCA clamp has opened fully. Reverse the process to tighten.

Overview

Handle Clamp Cheeseplate (KODAK Super 8) is a cheeseplate that clamps to the front of the camera handle and provides ARRI 3/8-16, 1/4-20, and M4x20mm MAP holes.

Flippable in every direction for multiple mounting options.

Combine with Universal ARRI Hot Shoe (1/4-20 and 3/8-16) and Microphone Shock Mount (Hot Shoe) for a configurable mic holder.

Overview

Power Distribution Box Hinge Adapter (15mm LW) attaches to the DB-4, DB-9, and DB-11 Power Distribution Boxes to allow them to be mounted on 15mm LW Rods.

The friction rod clamp allows for tilted positioning and adjustment without loosening a thumbscrew.

Overview

Sony FX6 15mm Rod Clamp attaches via the Sony FX6’s handle 1/4-20s with locating pin holes adjacent and provides a sideways 15mm rod clamp.

Overview

Sony 15mm Rod Clamp and TWIST Mount Kit for FX6 combines the Sony FX6 15mm Rod Clamp, Double-sided NATO Rail, Knuckle, and Spud for the Sony FX6.

The kit attaches via the Sony FX6’s handle 1/4-20s with locating pin holes adjacent and provides a sideways 15mm rod clamp.

Attaching the FX6 monitor to the TWIST Spud prevents monitor “flop” when using third party EVF loupes and still maintains the ability to fold the screen for travel.

The TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew.

The double-sided NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removal.