Support | Cinegear Amsterdam

SmallRig 1914 25mm Rod Support Feet For Ronin M/MX Grip/ Movi

Webmaster — Fri, 05 May 2023 13:59:54 +0000

The SmallRig 1914 25mm Rod Support Feet is exclusively designed for DJI Ronin M & Ronin MX Grip/Freefly MoVI Ring. 25mm rod clamp locks Ronin M/MX Grip/MOVI Ring so that it can stand on the ground firmly. A Cold shoe attaches to a magic arm and then attach monitor so that the cameraman could check the screen during handheld shooting. 1/4’’ threaded holes could attach magic arms and then monitor. 1/4’’ and 3/8’’ threaded holes could attach a quick release plate and sit on a tripod. The rubber cushions at the bottom are anti-sliding, making Ronin M & Ronin MX Grip / Freefly MoVI Ring stand on the ground firm. Wingnuts or screws could be applied to lock as per your needs. Support feet could be folded along with the Ronin grip and put into the bag.

The post SmallRig 1914 25mm Rod Support Feet For Ronin M/MX Grip/ Movi appeared first on Cinegear Amsterdam.

Hudson Spider Baby to 3/8″ 16

Webmaster — Fri, 10 Mar 2023 13:15:58 +0000

Thread - 3/8” 16
Diameter - 5/8”
Material - 6061 Aluminum and Stainless Steel.

The post Hudson Spider Baby to 3/8″ 16 appeared first on Cinegear Amsterdam.

Schneider-Kreuznach ISCORAMA 54 Support Bracket 1/4

Webmaster — Thu, 09 Mar 2023 12:44:41 +0000

1/4 | small support bracket | 1/4-20 thread | to mount ISCORAMA 54 on its support plate | included in ISCO4all

The post Schneider-Kreuznach ISCORAMA 54 Support Bracket 1/4 appeared first on Cinegear Amsterdam.

Schneider-Kreuznach ISCORAMA 54 Support Bracket 1/4 + 3/8

Webmaster — Thu, 09 Mar 2023 12:41:58 +0000

1/4 + 3/8 | big support bracket with 1/4 and 3/8 thread | made to mount ISCORAMA 54 CU-1.5x on its support plate

The post Schneider-Kreuznach ISCORAMA 54 Support Bracket 1/4 + 3/8 appeared first on Cinegear Amsterdam.

Schneider-Kreuznach ISCOspherical Focus Lock

Webmaster — Thu, 09 Mar 2023 12:32:41 +0000

Screw-on device | fixes ISCOphericals at infinity or other set focus distance | prevents focus gear ring from shifting when used with ISCORAMA 54 CU-1.5x

The post Schneider-Kreuznach ISCOspherical Focus Lock appeared first on Cinegear Amsterdam.

8Sinn Shoulder Rig Kit

Webmaster — Mon, 13 Feb 2023 01:06:07 +0000

8SINN SHOULDER RIG KIT

Baseplate features:
– 2 x 28mm Arri Rosettes
– 15mm rod compatible
– 3 x thumbscrews
– 4 x 1/4″ threaded openings
– 60mm center-to-center distance
– Dovetail guide rails (bottom)

Riser Plate I features:
– 2 x 1/4″ mounting screw
– 3/8″ mounting screw
– Rubber pads
– Aluminum made

Shoulder Support features:
– Aluminum made
– Lightweight
– 3 x 3/8″ Arri locating points
– Knurled rear surface
– Slender profile
– 1/4″-20 x1/2″(12mm) mounting screws

Rod Mount Bridge features:
– 15mm rod compatible
– 6 x 1/4″ threaded mounting points
– Aluminum made
– 60mm center-to-center distance
– Thumbscrew on each side

Compatibility:
Riser Plate I, included in this kit allows to obtain the optical center when used with the following cages:
8Sinn Z CAM E2-S6/F6/F8 Cage
8Sinn Z CAM E2 Cage
8Sinn Sony a7III / a7RIII Cage
8Sinn Sony A7RIV Cage
8Sinn BM Pocket Cinema Camera 4K / 6K Cage
8Sinn BM Pocket Cinema Camera 4K / 6K Half Cage
8Sinn Red Komodo Cage

Specifications:weight: 1.070 kg (+ rods)

Following kit includes:
1 set – 8Sinn 15mm Baseplate + Riser Plate I
2 sets – 8Sinn Side Arm for Shoulder Rigs + Dual Side Grip
1 pc – 8Sinn Shoulder Support

– Optional 15mm rods:

The post 8Sinn Shoulder Rig Kit appeared first on Cinegear Amsterdam.

8Sinn Shoulder Support + 8Sinn 15mm Rod Mount Bridge

Webmaster — Mon, 13 Feb 2023 00:59:17 +0000

8SINN SHOULDER SUPPORT + 8SINN 15MM ROD MOUNT BRIDGE

8Sinn Shoulder Support has been designed to make your shoulder rig complete. It is adapted to have two types of mounting solutions. The first type attaches the Shoulder Support directly to the 8Sinn Base Plate by three screws. The second type requires the mounting adapter which is the 8Sinn 15mm Rod Mount Bridge presented on this page. The bridge allows using the 8Sinn Shoulder Support in any rig with 15mm rods.

Dimensions: Length: 190mm, Height: 91mm, Width: 82mm (107mm w/ thumbscrews), Weight: 282g
Set includes: 1pc 8Sinn Shoulder Support, 1 PC 8Sinn 15mm Rod Mount Bridge
Shoulder Support:
– Aluminum made
– Lightweight
– 3 x 3/8″ Arri locating points
– Knurled rear surface
– Slender profile
– 1/4″-20 x1/2″(12mm) mounting screws
Rod Mount Bridge:
– 15mm rod compatible
– 6 x 1/4″ threaded mounting points
– Aluminum made
– 60mm center-tocenter distance
– Thumb screw on each side

The post 8Sinn Shoulder Support + 8Sinn 15mm Rod Mount Bridge appeared first on Cinegear Amsterdam.

8Sinn Shoulder Support

Webmaster — Mon, 13 Feb 2023 00:57:09 +0000

8SINN SHOULDER SUPPORT

8Sinn Shoulder Support has been designed to make your shoulder rig complete. It is adapted to have two types of mounting solutions. The first type attaches the Shoulder Support directly to the 8Sinn Base Plate by three screws. The second type requires the mounting adapter which in this case is the 8Sinn 15mm Rod Mount Bridge. The bridge allows using the 8Sinn Shoulder Support in any rig with 15mm rods. Additionally, the support can be reversed in the vertical plane, so the user can adjust it to his needs.

Dimensions: Length: 190mm, Height: 91mm, Width: 30mm, Weight: 231g
Set includes: 1pc 8Sinn Shoulder Support, 3 pcs mounting screws
Key features:
– Aluminum made
– Lightweight
– 3 x 3/8″ Arri locating points
– Knurled rear surface
– Slender profile
– 1/4″-20 x1/2″(12mm) mounting screws

The post 8Sinn Shoulder Support appeared first on Cinegear Amsterdam.

8Sinn Sigma MC-21 Support for S1/S1R/S1H Cage

Webmaster — Fri, 10 Feb 2023 22:30:37 +0000

8SINN SIGMA MC-21 SUPPORT FOR S1/S1R/S1H CAGE

Product`s function is to support the Sigma MC-21 Adapter. 8Sinn Panasonic S1 / S1R / S1H Cage has dedicated openings prepared to place the support on the cage.

Dimensions: Height: 19mm, Length: 39mm, Width: 24mm; Weight: 16g
Set includes: 1pc 8Sinn Sigma MC-21 Support for S1/S1R/S1H cage

The post 8Sinn Sigma MC-21 Support for S1/S1R/S1H Cage appeared first on Cinegear Amsterdam.

Niceyrig Sliding Shoulder Rig Support System with Camera/Camcorder Baseplate

cineadmin1 — Tue, 10 May 2022 11:09:03 +0000

For DSLR Cameras and Camcorders
Adjustable Baseplate
Leather Handgrips Included
15mm Rod Clamps
Shoulder Pad with 1/4″-20 Threads
Durable and Lightweight Aluminum

The Niceyrig Sliding Shoulder Rig Support System with Camera/Camcorder Baseplate is designed to provide comfort and support to your DSLR setup in the field while increasing stability for B-roll footage, vox pop interviews, and more. A shoulder pad with dual 15mm rod clamps attaches to two stationary 16″ long aluminum rods, while the camera baseplate and included leather handgrips can easily be moved forwards or backwards to ensure optimal balance and comfort for the camera operator.

The 1/4″-20 threads in the shoulder pad enable battery attachment. Adjustment of the camera baseplate and handgrips along the 15mm rods allows the user to mount a monitor and see the quality of the shot while the viewfinder is positioned outside the field of vision.

Key Features:

Included 15mm rods allow the user to shift camera baseplate, handle, and shoulder pad placement for optimal balance
Compatible with DSLRs, camcorders, and other small cameras
Comfortable leather handgrips
Sponge pads reduce pressure of the camera on the shoulder

The post Niceyrig Sliding Shoulder Rig Support System with Camera/Camcorder Baseplate appeared first on Cinegear Amsterdam.