– 80% Charge – Flashing Green/Orange
– Fully Charged – Green

– Worldwide mains input voltage 90v-240v

This charger is a perfect travel charger due to it’s size and weight, will fit into bags or carryalls very snugly!

The post Hawk-Woods VL-MX1 appeared first on Cinegear Amsterdam.

– 80% Charge – Flashing Green/Orange
– Fully Charged – Green

Worldwide mains input voltage 90-240V

This is a simultaneous charger so you can expect to have both batteries ready faster!

The post Hawk-Woods VL-MX2 appeared first on Cinegear Amsterdam.

Doing this protects the cycle life charging at a lower current.

Still keeping the simultaneous function so that you may charge all four batteries at once for ultimate charging times!

This charger is fitted with 3A boards and is suited for our mini-vl battery range as well as our high performance and classic VL batteries. You will be able to charger other manufacturers batteries with this charger.

LED’s fitted for battery status, also fitted with soft leather carry handle.

– 80% Charge – Flashing Green/Orange
– Fully Charged – Green

The post Hawk-Woods VL-MX4 appeared first on Cinegear Amsterdam.

The camera is powered via a fixed XLR fly lead.

This adaptor plate also gives the ability to hotswap between a V-Lok battery and the cameras internal battery system(BPA Batteries) BPA-50 BPA-98allowing for continuous power without having to shut the camera down.

Check out our range of Mini V-Lok batteries which compliment the VLM-C53B perfectly VL-M98D VL-M150D

The post Hawk-Woods VLM-C53B appeared first on Cinegear Amsterdam.

This adaptor offers 4x D-TAP outputs (un-regulated) and 1x USB which is 5V 2A. There is an option to have a fixed cable fitted to the product, please refer to our sales team or your local dealer.

The post Hawk-Woods VLM-DC6 appeared first on Cinegear Amsterdam.

This adaptor offers 4x D-TAP outputs (12v regulated). There is an option to have a fixed cable fitted to the product, please refer to our sales team or your local dealer to do this.

The post Hawk-Woods VLM-DC6X appeared first on Cinegear Amsterdam.

The adaptor attaches via the lock in mechanism in the FX9’s battery compartment and then finally screwed to the top of the camera body to secure in place.

Users have the benefit of 2x Power-con (D-Tap) outputs 11 – 17 volts allowing further equipment/accessories to be powered. 1x 5V 2A USB is also available for powering or charging accessories such as mobile phones.

Power is provided via a short DC jack cable via the FX9’s DC Input.

A low voltage warning LED is also situated at the top of the fitting, this is to combat the camera as it will only ever see the 19.5v in the viewfinder. So no warning would be given when the battery is low. The LED will flash at 11.5v giving you a decent warning to make a change.

The post Hawk-Woods VLM-FX9 appeared first on Cinegear Amsterdam.

Users have the benefit of 4x Power-con (D-Tap) outputs 11 – 17 volts allowing further equipment/accessories to be powered. 1x 5V 2A USB is also available for powering or charging accessories such as mobile phones.

Power is provided via a 20cm DC jack cable via the FX9’s DC Input which is regulated to 19.5v.

A low voltage warning LED is also situated at the top of the fitting, this is to combat the camera as it will only ever see the 19.5v in the viewfinder. So no warning would be given when the battery is low. The LED will flash at 11.5v, giving you a decent warning to make a change.

(This will also work with the Sony FX6 camera)

The post Hawk-Woods VLM-FX9-15 appeared first on Cinegear Amsterdam.

The adapter is designed to work with the 056W & 058W monitor, this adapter will simply mount to the rear of the monitor allowing the use of V-Lok batteries. Screws are provided with the kit.

A fixed flying 13.5cm lead will provide power to the monitor DC input. The fitting also offers a D-TAP output for powering further accessories.

Using the MINI V-Lok battery system, will keep weight to a minimum, however provide plenty of power to the monitor allowing you to run for longer with less battery changes. This is massive improvement from running off the Sony NPF batteries.

Compatible with:
TV Logic F-7H MK2
TV Logic F-10A

The post Hawk-Woods VLM-TV1 appeared first on Cinegear Amsterdam.

This adapter will mount directly to your TV-Logic 055A monitor, fitting screws will be provided in the kit.

Compatible with:
TV Logic F5A

The post Hawk-Woods VLM-TV2 appeared first on Cinegear Amsterdam.