DirtyRigger | Cinegear Amsterdam

DirtyRigger Phoenix™ Heat Resistant Glove

Webmaster — Tue, 07 Mar 2023 07:34:16 +0000

Heat & Abrasion Resistant Glove.

Achieving a maximum temperature of 250°C for up to 15 seconds (EN407: 2004, Contact Heat on palm) the Phoenix is a truly superb glove! The heat resistant lining is reinforced with ultra-tough, abrasion resistant leather and secured with double stitched seams for exceptional durability.

Max. Temp. 250°C for up to 15 seconds (EN407: 2004, Contact Heat on palm)
Abrasion resistant, double layered leather palm
Articulated second layer for exceptional freedom of movement (palm side)
Double stitched seams
Breathable inner-finger lining
Snug fit to minimise snagging
Write-on ID Tag

The post DirtyRigger Phoenix™ Heat Resistant Glove appeared first on Cinegear Amsterdam.

Dirty Rigger Comfort Fit™ Rigger Glove (V1.6)

admin2 admin — Wed, 08 Apr 2020 09:11:48 +0000

Light & flexible for all-day comfort
Snug fit to minimise snagging
Double layered synthetic leather on palm and key wear areas
Double stitching
Double stitched lanyard eyelet on wrist cuff (lanyard not included)
Neoprene comfort padding
Write on ID tag
Low profile palm padding
Comfortable Durability.

Provide your hands with a comfortable barrier against a moderate manual working lifestyle. The fitted design moves with your hands as you work, minimising the risk of snagging and making it a comfortably light glove to wear. Although light, the Comfort Fit™ doesn’t hold back on durability. The breathable materials look after your hands on the inside, whilst the double-layered synthetic leather and double stitching do the hard work on the outside.

The post Dirty Rigger Comfort Fit™ Rigger Glove (V1.6) appeared first on Cinegear Amsterdam.

DirtyRigger Rigger’s Multi-Tool

Thomas — Wed, 18 Dec 2019 13:45:55 +0000

So simple yet it’s indispensable. Cut from 4mm hardened steel it’s one of the toughest multi-tools of its kind on the market. 14 separate tools remain instantly available, with every one designed around some of the most common needs in the professional rigging industry. Finished in a durable matt black powder coat and if you were ever in doubt, it has got a bottle opener too.

3/8″, 1/2″, 3/4″ nut tools
7mm (M6) square nut tool
18mm (M10), 20mm (M12), 24mm (M14) nut tools
4mm and 6mm eyelets
Wire Stripper (x2)
Wingnut tool
Barndoor tool
Bottle opener

The post DirtyRigger Rigger’s Multi-Tool appeared first on Cinegear Amsterdam.

DirtyRigger Gear Bag (12 ltr)

Thomas — Wed, 18 Dec 2019 13:44:44 +0000

Keep everything you need right by your side in the Dirty Rigger® Gear Bag. 12 ltrs of organised space, constructed using heavy duty materials and a water resistant outer shell. Padded walls help cushion everything from tools and equipment to tablet devices and drink flasks. 11 inner tool slots give one-handed access to your on-the-moment essentials while a huge central storage compartment caters for almost anything you need. Carry it all using the adjustable seatbelt-style strap and shoulder pad.

Heavy duty and water resistant
Designed and hand made in the UK
12 ltrs of internal storage
Large central storage compartment – 33cm(W) x 12cm(D) x 25cm(H)
11 inner tool slots
Padded external walls
Separate smart phone pocket – 9cm(W) x 5cm(D) x 20cm(H)*
Padded front pocket for tablet devices – 26cm(W) x 7cm(D) x 23cm(H)*
2 external D-rings for extra attachments
Hook and loop closure flap with added buckle
Padded, adjustable seatbelt-style shoulder strap
Rear zip-close pocket – 33cm(W) x 1cm(D) x 22cm(H)*
Grab handle
Overall dimensions – 39cm(W) x 17cm(D) x 28cm(H)

The post DirtyRigger Gear Bag (12 ltr) appeared first on Cinegear Amsterdam.

DirtyRigger Pro-Pocket™ XT

Thomas — Wed, 18 Dec 2019 13:41:19 +0000

The Pro-Pocket™ XT provides a tool storage solution which falls between the Pro-Pocket™ 2.0 and the Tech Pouch / Tech Pouch 2.0 for storage capacity. While still relatively compact, its innovative internal and external layout provides an impressive level of tool storage with minimal bulk.

Vertical storage, quick-access layout
1 x internal smart phone compartment: 10cm(h) x 8cm(w) x 3cm(d) (fit sizes up to iPhone 6/7 Plus)
1 x internal tool compartment: 15cm(h) x 6cm(w) x 4cm(d)
2 x external, instant-access elasticated tool loops (2cm un-stretched diameter)
2 x external D-ring attachments
1 x detachable 27cm accessory loop
1 x top-mounted snap hook
2 x vertical tool slots mounted in each internal compartment (4 slots in total)
Headphone cable pass-through (phone compartment only)
Constructed from durable 1200×1200 denier nylon polyester
Belt clip & belt loop for preferred attachment

The post DirtyRigger Pro-Pocket™ XT appeared first on Cinegear Amsterdam.

DirtyRigger Gaffer Tape Holder

Thomas — Wed, 18 Dec 2019 13:38:52 +0000

Acting as a tool leash, the Gaffer Holder quickly and securely offers an accessible strap for holding tools, clamps, bags and its original design intention – gaffer tape. The quick release buckle allows for single handed use, while the adjustable strap provides up to a 70cm circumference for larger items. The lightweight aluminium snap hook secures the holder to your belt, or any compatible Dirty Rigger® tool pouch or tool belt.

Multi-purpose strap
Quick release buckle
Adjustable strap provides up to a 70cm circumference
Lightweight aluminium snap hook

Gaffer roll not included. General use only. Not intended for working at height or fall arrest.

The post DirtyRigger Gaffer Tape Holder appeared first on Cinegear Amsterdam.

DirtyRigger Tool Belt

Thomas — Wed, 18 Dec 2019 13:37:32 +0000

Allow your waist to breathe with Dirty Rigger® multi-layered material construction. The padded 3D internally-breathable mesh provides excellent ventilation throughout the belt, minimising uncomfortable under-belt sweat. Tried and tested heavy duty 50mm belt buckle helps to keep the Tool Belt comfortably secured around your waist and can be removed single handedly when required. Fully compatible with the Dirty Rigger® pouch and accessories range.

Internally-breathable mesh for ventilation
Quick release buckle
5cm (2″) belt
Compatible with Dirty Rigger® accessories
Adjust to fits sizes 30′′-42′′

Ensure the belt and all added attachments i.e. tools, tool pouches & their contents are adequately secured. This item is intended as a general use tool belt.

The post DirtyRigger Tool Belt appeared first on Cinegear Amsterdam.

DirtyRigger Padded Utility Belt

Thomas — Wed, 18 Dec 2019 13:35:55 +0000

Spread the load with an extra wide 12.7cm (5”) padded belt-back, lined with a breathable mesh and specially selected foam for optimum all-day comfort. Move freely as the belt narrows at the front and sides, minimising bulk and restriction of movement, often found in wider belts. Four quick access, repositionable D-rings provide you with even more versatility for accessory attachment. Compatible with all Dirty Rigger® tool pouches and accessories.

Extra wide 5 inch padded back
Narrower sides and front for freedom of movement
Breathable mesh for ventilation
Four repositionable D-rings for extra attachments
Heavy duty, quick release belt buckle
Outer belt strap – 5cm wide
Inner belt – 9cm (front width) 12.7cm (back width)
Adjust to fit sizes 30″-42″

Ensure the belt and all added attachments i.e. tools, tool pouches & their contents are adequately secured. This item is intended as a general use tool belt.

The post DirtyRigger Padded Utility Belt appeared first on Cinegear Amsterdam.

DirtyRigger Comfort Fit™ Rigger Glove

Thomas — Wed, 18 Dec 2019 13:15:33 +0000

Light & flexible for all-day comfort
Snug fit to minimise snagging
Double layered synthetic leather on palm and key wear areas
Double stitching
Double stitched lanyard eyelet on wrist cuff (lanyard not included)
Neoprene knuckle padding
Write on ID tag
Low profile palm padding
Machine washable at 30°C

This glove is currently undergoing PPE testing and should be considered suitable for general use in the meantime. For specific PPE requirements please refer to our specialised PPE range.

The post DirtyRigger Comfort Fit™ Rigger Glove appeared first on Cinegear Amsterdam.

DirtyRigger Comfort Fit™ Fingerless Rigger Glove (V1.6)

Thomas — Wed, 18 Dec 2019 13:14:01 +0000

The Comfort Fit™ Glove range has always been light to wear, but the new Fingerless glove takes it to a new level. The high-cut styling gives you exceptional freedom when undertaking the most intricate tasks, yet over 90% of your hand still remains covered*. The fitted design moves with your hands as you work, minimising the risk of snagging and making it a comfortably light glove to wear. Although light, the Comfort Fit™ doesn’t hold back on durability. The breathable materials look after your hands on the inside, whilst the double-layered ultra-tough synthetic leather and double stitching do the hard work on the outside.

Light & flexible for all-day comfort
Snug fit to minimise snagging
Double layered synthetic leather on palm and key wear areas
Double stitched seams
Neoprene knuckle padding
Write-on ID tag
Double stitched lanyard eyelet on wrist cuff (lanyard not included)
Low profile palm padding
Machine washable at 30°C

This glove is currently undergoing PPE testing and should be considered suitable for general use in the meantime. For specific PPE requirements please refer to our specialised PPE range.

The post DirtyRigger Comfort Fit™ Fingerless Rigger Glove (V1.6) appeared first on Cinegear Amsterdam.