Cranes | Cinegear Amsterdam

Tilta Hydra Mini Arm Pro Kit – V Mount (HDA-T08-A-V)

Webmaster — Wed, 01 Nov 2023 17:30:45 +0000

Hydra-Arm Mini is the ultimate cinema camera car crane. Complex vehicle mounted cinematography is now more within reach for filmmakers than ever before.

The system is portable, lightweight, and relatively easy to use for filming vehicles from multiple angles while in movement.
Designed specifically for the RS 3 PRO and RS 2, but compatible with a range of gimbals and camera systems such as the Ronin 4D, Ronin MX, Freefly Movi Pro.
The lightweight, counterweight-free design makes the system faster to set up and safer to operate as users will only need to focus on one end of the arm at any given time.
The Pro Kit includes suction cups, speed rail and ratchet straps allow you to mount the system easily to most vehicles that can support the 176lb weight of the arm not including a gimbal or camera.
The Basic Kit will be available in the near future without mounting hardware for users who already own 50mm Speed Rail or who are looking to build their own permanent mount.
There are optional suction cup kits for vehicles with various sized sunroofs including panoramic sunroofs and an optional Electronic Kit that allows users to monitor the suction cup pressure remotely for added safety.
The Shock Absorbing Arm helps stabilize the gimbal when operating on uneven surfaces and can be adjusted for various payloads.
The Shock Absorbing Head of the arm can be individually adjusted for both the horizontal and vertical axis.
The included Controller connects via a wired connection ensuring reliable communication to the arm.
The Controller gives the operator access to various options for the tilt and pan axis, including speed, dampening, and range of motion limitations for each axis individually.
Custom user settings allow the operator to select from a range of configurations so that they can operate in a way that is most comfortable to them.
Pro Mode is an expanded control option that allows users to control the Hydra Arm Mini and an RS2/RS3 Pro Gimbal simultaneously through the controller.
Please note this is not recommended for most shooting situations and is only advised with proper precautions.
The system can support speeds of up to 74 mph (120 km/h) in ideal conditions, but we recommend keeping speeds at or below 37 mph (60km/h) especially when using heavier cameras or lighter gimbals.
The primary factors that will impact operating speeds are camera weight, gimbal strength, and weather conditions.
Other gimbals can be used as well as long as they can be mounted via 1/4″-20 threads, powered via V-Mount batteries and stay within the 22lb weight limit.
The system includes a V-Mount Battery Plate mounted on the end of the arm which allows users to power their gimbal via the included P-Tap to 2 Pin Power Cable or with a different cable if needed.
*An optional Gold Mount Battery Plate will be available as an additional purchase in the near future.*
The arm itself does not have any power or video passthrough features meaning you will need to utilize a wireless video transmitter (not included) and power your camera via onboard batteries or the Gold/V-Mount battery plate found on the arm.
To power the system, you will need a 220V 1800wH+ power source which is NOT INCLUDED.
We recommend the EcoFlow Delta and a 110 to 220V Power Converter (3000W+) if needed.
RETURN POLICY: This system can be returned within 30 days, but will be subject to a 30% RESTOCKING FEE unless the system arrives defective.
Return shipping for non-defective units will not receive return labels.

The post Tilta Hydra Mini Arm Pro Kit – V Mount (HDA-T08-A-V) appeared first on Cinegear Amsterdam.

Teris JQ50-III Carbon Fiber Mini Jib

cineadmin1 — Thu, 07 Apr 2022 09:04:18 +0000

Overzicht

Designed and engineered for lightweight, user-friendly, and vibration-free operation, the JQ50-III Carbon Fiber Mini Jib from Teris is a compact yet powerful tool that accommodates camera setups weighing up to 22 lb. Crafted with a durable carbon fiber arm, it extends seamlessly and offers a tilt range of +87/-66°, enabling fluid and cinematic camera movements. This versatile jib features a specialized gimbal mount, ensuring compatibility with DJI RS 4 Pro, Ronin-S, RS 3, RS 3 Pro, RS 2, and Zhiyun CRANE-2 gimbal stabilizers, making it an excellent choice for dynamic and professional filmmaking.

Included

Teris JQ50-III Carbon Fiber Mini Jib
Safety Line with Cable Pole
DJI/Zhiyun Gimbal Mount
4 x Clip Mount
Mounting Base for Control Handle
Counterweight Bar
Carry Bag
Limited 3-Year Manufacturer Warranty

Specifications

Load Capacity	22 lb / 10 kg
Material of Construction	Carbon Fiber
Dimensions	12.8′ / 390 cm (Shortest Length) 16.4′ / 500 cm (Longest Length) 4.3′ / 131 cm (Transport Length)
Weight	15.7 lb / 7.1 kg

The post Teris JQ50-III Carbon Fiber Mini Jib appeared first on Cinegear Amsterdam.

DJI Ronin Expansion Base Kit For DJI RS 2R

cineadmin1 — Wed, 04 Nov 2020 12:44:15 +0000

Overzicht

The DJI Ronin Expansion Base Kit makes it possible to mount and control DJI RS 2 in a jib, car, slider, cable cam, and other platforms. This kit includes a DJI Ronin Tethered Control Handle for extended wired control of camera focus and parameters, camera shutter, and gimbal movement. A Universal Base Mount and External Battery Adapter allow the DJI Ronin BG30 Grip to power DJI RS 2.

In The Box

Universal Base Mount × 1
Base Plate × 1
Screw 1/4"-20 × 5
External Battery Adapter × 1
Control Cable (30 cm) × 1
Control Cable (5 m) × 2
Tethered Control Handle × 1
Expansion Port × 1
Allen Wrench (4 mm) × 1
Safety Buckle × 1
Allen Wrench (2.5 mm) × 1
Stiffener × 1

Compatibility: DJI RS 2

The post DJI Ronin Expansion Base Kit For DJI RS 2R appeared first on Cinegear Amsterdam.

Kessler Pocket Jib Crane

Thomas — Tue, 17 Dec 2019 15:09:15 +0000

The Pocket Jib™ has a telescopic dual rail arm design that has a maximum reach of five feet, fully extended, which is approximately 6″ less than our KC-8 crane. The end of the crane arm features a ball relocator with 100mm bowl, so you can mount a 100mm ball fluid head. The weight bar system is also telescopic and collapses and folds away for easy transport.

Unit Weight:	21 lbs. (9.5kg)

Weight Capacity:	20 lbs (arm extended) & 40 lbs (arm compacted) (9kg & 18.1kg)

Collapsed Length:	45.5″

Fully Extended Length:	83.5″ (to end of ball relocator)
Fully Extended Length:	76″ (to end of platform)

The post Kessler Pocket Jib Crane appeared first on Cinegear Amsterdam.

Kessler Pocket Jib Traveler

Thomas — Tue, 17 Dec 2019 15:05:39 +0000

Compact & Portable
The Pocket Jib Traveler is completely self contained and does not need to be taken apart for travel unlike most similar sized jibs. It also features drag control & locks, a rare feature in the ultra-portable jib category

Quick Mounting
A center-mounted camera platform make camera mounting more stable and seamlessly integrates with the Kessler Kwik Release system for fast camera mounting. The Pocket Jib Traveler can also mount cameras using other mounts including our 100mm ball mount, a standard stud mount and many more.

Durable & Lightweight
The Pocket Jib Traveler boasts the highest weight capacity of similar sized jibs by handling rigs up to 4.24 kg (10lbs). Its adjustable and sliding weight bar provide fine-tuning control and are removeable for lighter weight. The Pocket Jib Traveler was engineered with weight reducing window cuts that both maintain its structural integrity and also keep the system light-weight.

Minimal Counter-balance Needed
The Pocket Jib Traveler’s sliding weight bar reduces the overall counter-balance weight needed to balance the jib, thus reducing the required load necessary for your shoots.

Universal Mounting
At the mounting base, there are both 3/8″-16 and 1/4″-20 threaded holes for a variety of mounting options. Whether it be our patented Kwik Release system, 100mm Ball Kit with a 3/8″-16 stud or even a standard tripod quick release plate, you’ll be up and running in no time.

Monitor Mounting
Easily attach monitors and accessories with the provided 1/4″-20 holes on the side of the base.

Camera Platform Extender
Use the Camera Platform Extender for the Pocket Jib Traveler to easily mount larger bodied cameras to the jib. If using a larger bodied camera without this piece, you may encounter conflict with the back of the camera and the jib arm when moving to a low jib position.

Weight:	2.49kg (5.5 lbs.)
Collapsed Length:	68.58 cm (27 in)
Circular Travel:	182.88cm (72 in)
Weight Capacity:	4.53kg (10 lbs.)

The post Kessler Pocket Jib Traveler appeared first on Cinegear Amsterdam.

Kessler Pocket Jib Pro

Thomas — Tue, 17 Dec 2019 15:02:58 +0000

The Pocket Jib PRO has been designed for a greater weight capacity when larger cameras and rigs are being used. With its heavy duty arms, the PJ PRO can handle up to 50 lbs. in any length configuration. This is perfect for RED’s, ALEXA’s or any other rig weighing up to 50 lbs. (We recommend the regular Pocket Jib for cameras under 20 lbs.)

The Kessler Pocket Jib PRO is the ultimate compact, portable jib. Not only is this jib fully collapsible for easy transport, but you can also mount the Kessler Pocket Dolly™ or CineSlider™ to it, turning it into a virtual “all-in-one” production tool, offering both a jib and mini-dolly in one unit.

The PJ PRO has a telescopic dual rail arm design that has a maximum reach of five feet, fully extended, which is approximately 6″ less than our KC-8 crane. The end of the crane arm features a ball relocator with 100mm bowl, so you can mount a 100mm ball fluid head.

Unit Weight:	11.34kg (25 lbs.)

Weight Capacity:	22.68kg (50 lbs.)

Collapsed Length:	116.84 cm (46 inch)

Fully Extended Length:	212.09 cm (83.5 inch) – to end of ball re-locator
Fully Extended Length:	193.04 cm (76 inch)- to end of platform

The post Kessler Pocket Jib Pro appeared first on Cinegear Amsterdam.

Kessler KC-12 Crane

Thomas — Tue, 17 Dec 2019 14:57:08 +0000

Tripod system is not included!

The original Kessler Crane is the industry standard in lightweight camera crane systems. Featuring 360 degree rotation, an invertible camera platform for under or over slung camera positions, a two arm design for maximum stability and built with high-grade anodized aluminium the Kessler Crane is as robust as it is functional. Easily broken down for transportation and uses standard household style weights to achieve proper balance.

In the box:

1x KC-12 Crane (base, mid, tip sections)

2x Frame coupler bars with 4 knobs

1x Tool-less pack

1x Control rod coupler bar with 2 knobs

1x Handle (2x Hex heads, 2x flat washers and 1x hex key)

1x Camera screw

4x Fine tuning weights

1x Vertical brake

1x Extended weight bar

The post Kessler KC-12 Crane appeared first on Cinegear Amsterdam.

Teris JQ40 Carbon Fiber MiniCrane Jib for Ronin-S & Select Other Gimbals

Thomas — Fri, 01 Nov 2019 13:20:39 +0000

Teris JQ40 Overview

The Teris JQ40 Carbon Fiber Mini Jib is designed for use with the Zhiyun-Tech Crane-2 handheld gimbal. It features a head fitting on the end for the Crane-2, but it can also be used with the DJI Ronin-S if you incorporate the optional DJI Ronin-S Universal Mount. The JQ40 is 13′ long fully extended and supports up to 15 lb loads.

The Mini Jib comes with a tripod mount accessory that can be attached along the length. The tripod mount accessory has 1/4″-20 and 3/8″-16 tripod mount threads on the bottom, plus a total of three 1/4″-20 threaded holes on the sides for attaching monitors and other accessories. There’s also a counterweight rod on the other end that supports standard weight plates.

The JQ40 Mini Jib is made of lightweight carbon fiber and telescopes out in multiple stages. The clamps at each stage are made of aluminum to ensure a stronger clamping force. Multiple accessories are additionally included for different applications. Among these is a steel wire, snap rings with accessory fittings, and two HDMI cables that are approximately the length of the jib for connecting monitors and other devices. A carry bag is also supplied that fits the jib and all accessories.

The post Teris JQ40 Carbon Fiber MiniCrane Jib for Ronin-S & Select Other Gimbals appeared first on Cinegear Amsterdam.