Set WHDI DwarfConnection DC-LINK-CLR2.MKII

Panoramica

The CLR2 MKII is the successor of the CLR2 with now completely black design. Its range increased to 300 meters and the impressive performance, make it probably the most stable radio in its price class.

To find the optimal channel, the CLR2 MKII has a frequency scanner and an antenna function monitor, the DC-SCAN, which can be output via the HDMI port on the receiver. The wireless transmission of video signals and the frequency monitor can be used alternately. Like all non-DFS systems of the DC-LINK family, the CLR2 MKII is compatible to all WHDI predecessor systems as well as to all other, larger systems and can be extended with further DwarfConnection receivers as desired. All receivers of the MKII series have different frequency sets to receive video signals from other manufacturers with non-DFS WHDI. Thus, all new DC Link receivers can be added to an existing WHDI system from other manufacturers.

With the MKII series of DFS-free video radios, Dwarf Connection has found a solution for sensitive content: By implementing an Encryption Mode, which can be activated in an uncomplicated way, connections with an infinite number of receivers are still possible. The operation of the entire radio system, now known as “Master Channel Selection”, works even easier than before. All receivers react to channel changes of the transmitter and follow automatically.

The CLR2 offers beginners and video radio professionals the highest quality, functionality as well as flexible expandability and is therefore the ideal solution for wireless transmissions over short and medium distances. Complicated pairing is not necessary due to the proven manual frequency selection. The simple menu navigation and a high-quality OLED display provide the necessary orientation even in bright environments. Despite the small design, both the transmitter and receiver have HDMI and SDI connections. The receiver can supply up to three output devices via 2 SDI connectors and one HDMI connector.

E' dotato di porte di ingresso e uscita

• Up to 300 meters wireless video
• Uncompressed video up to 1080p60 4:2:2 10-bit
• Frequency scanner via HDMI output
• Antenna function monitor via HDMI output
• Adjustable fan
• OSD can be switched off
• OLED display on the side
• Master Channel Selection
• Encryption mode
• Supports META data and start/stop function
• Fully compatible with older devices
• Delay under 1ms
• 3G-SDI & HDMI via built-in converter
• Works with unlimited wireless receivers
• Manual frequency selection – no pairing required
• Stable connection using preset channels and no need for DFS
• Works with 5GHz ISM band

Nella scatola

1x TX
1x RX
3x Antenna
2x D-Tap Cable 4pin
Magic Arm & Hotshoe Mount
Case DC.X.0027

Specifiche

Transmitter

• Inputs: 2x SDI / 1x HDMI
• Supported resolutions: 1080p (60, 59.94, 50, 30, 29.97, 25, 24, 23.98) / 1080i (60, 59.94, 50) / 720p (60, 59.94, 50) / 576i (50) / 480i (59.94)
• Audio: Audio 24bit/48kHz 2-channel audio 24bit/48kHz
• Range: Up to 300 m (line of sight)
• Sensitivity: -75 dBm
• Frequency band: 5GHz-ISM
• Latency: < 1 ms
• Bandwidth: 40 MHz
• Display: 0.91″ OLED
• Power supply: 9.0 – 18.0V DC
• Power consumption: < 8 W
• Dimensions (WxDxH): 72 x 22 x 131 mm
• Weight: 0.29 kg

Receiver

• Outputs: 2x SDI / 1x HDMI
• Supported resolutions: 1080p (60, 59.94, 50, 30, 29.97, 25, 24, 23.98) / 1080i (60, 59.94, 50) / 720p (60, 59.94, 50) / 576i (50) / 480i (59.94)
• Audio: Audio 24bit/48kHz 2-channel audio 24bit/48kHz
• Range: Up to 300 m (line of sight)
• Sensitivity: -75 dBm
• Frequency band: 5GHz-ISM
• Latency: < 1 ms
• Bandwidth: 40 MHz
• Display: 0.91″ OLED
• Power supply: 9.0 – 18.0V DC
• Power consumption: < 8 W
• Dimensions (WxDxH): 100 x 22 x 141 mm
• Weight: 0.38 kg

Antennas

• Gain: 3,3dBi
• Impedance: 50 Ohm
• Frequency: 5100-5800 MHz
• Vertical polarization
• Beam width: 360° horizontal, 40° vertical
• Length 160mm
• Weight: 17g