Nella scatola

1x mirino elettronico EAGLE SDI (nero)
1x cavo SDI per mirino elettronico (D-Tap, 40 cm)
1x Guida rapida
1x biglietto di ringraziamento
1x etichetta LOGO

Specifiche

Compatibilità

Universale

Specifiche tecniche

Apertura Da T1.6 a T22
Attacco Obiettivo: PL
Fattore di Compressione: 1.5X
Messa a fuoco ravvicinata: 0.79m / 2.6ft
Rotazione della messa a fuoco: 150°
Rotazione del Diaframma: 76.7°
Peso: 1.63lbs / 742g
Lame del Diaframma: 16
Diametro Anteriore: 80mm
Filetto del filtro: 77mm X 0.75
Cerchio di immagini: 25x17mm
Lunghezza (PL): 93mm
Aberrazione Ottica: Argento/Blu/Ambra

E' dotato di porte di ingresso e uscita

• Wireless microphone system allows you to record an on-camera personality to your Lightning-equipped iOS mobile device
• Clip-on transmitter with built-in omnidirectional microphone for quick set up
• One-click noise cancellation feature delivers high-performance recording quality by cutting out ambient noise for clearer voice recordings
• Dual-channel receiver plugs directly into the Lightning port on your device, allowing you to add a second transmitter (available separately) for two-person shoots
• Plug-and-play configuration with LarkSound app for adjustments
• 48 kHz, 16-bit sampling rate
• Up to 656′ wireless transmission range
• 2.4 GHz adaptive frequency hopping
• LED status indicators

In the Box

• Hollyland LARK C1 SOLO Wireless Microphone System with Lightning Connector for iOS Devices (Black, 2.4 GHz)
• Transmitter
• Receiver
• USB-A to USB-C Cable
• Furry Windscreen
• Storage Case
• Garanzia limitata di 1 anno del produttore

E' dotato di porte di ingresso e uscita

• Wireless microphone system allows you to record two on-camera personalities at once to your USB-C mobile device
• Clip-on transmitters with built-in omnidirectional microphones for quick set up
• One-click noise cancellation feature delivers high-performance recording quality by cutting out ambient noise for clearer voice recordings
• Dual-channel receiver plugs directly into USB-C port on device
• Plug-and-play configuration with LarkSound app for adjustments
• 48 kHz, 16-bit sampling rate
• Up to 656′ wireless transmission range
• 2.4 GHz adaptive frequency hopping
• LED status indicators
• Includes charging case with built-in battery for additional operating time

In the Box

• Hollyland LARK C1 DUO 2-Person Wireless Microphone System with USB-C Connector for Mobile Devices (Black, 2.4 GHz)
• 2 x Transmitter
• Receiver
• USB-A to USB-C Cable
• 2 x Furry Windscreen
• Storage Case
• Charging Case
• Garanzia limitata di 1 anno del produttore

E' dotato di porte di ingresso e uscita

• Wireless microphone system allows you to record two on-camera personalities at once to your Lightning-enabled iOS device
• Clip-on transmitters with built-in omnidirectional microphones for quick set up
• One-click noise cancellation feature delivers high-performance recording quality by cutting out ambient noise for clearer voice recordings
• Dual-channel receiver plugs directly into Lightning port on iOS smartphone or tablet
• Plug-and-play configuration with LarkSound app for adjustments
• 48 kHz, 16-bit sampling rate
• Up to 656′ wireless transmission range
• 2.4 GHz adaptive frequency hopping
• LED status indicators

In the Box

• Hollyland LARK C1 DUO 2-Person Wireless Microphone System with Lightning Connector for iOS Devices (Black, 2.4 GHz)
• 2 x Transmitter
• Receiver
• USB-A to USB-C Cable
• 2 x Furry Windscreen
• Storage Case
• Charging Case
• Garanzia limitata di 1 anno del produttore

Reliable Audio Transmission

• Audio can be transmitted from up to 656′ away thanks to its 2.4 GHz auto frequency hopping technology and upgraded Bat Obstacle Avoidance 2.0 technology to prevent cut-offs or interference.
• Three different volume settings can be toggled depending on your recording setting. Use “High” when recording from a long distance, “Medium” when interviewing in an open space, or “Low” for recording in a small office or closed studio.
• Built-in device identification auto-adjusts the volume setting on your connected mobile phone or camera.

Smart Noise Cancellation

HearClear smart noise cancellation can be turned on with the touch of a button to filter out unwanted noise and maintain vocal clarity. Loud ambient noise like traffic or crowds are eliminated in instances like outdoor interviews. If you want to maintain room tone, simply turn noise cancellation back off.

Hi-Fi Sound Quality, Intuitive Controls

• Record audio with 48 kHz and 16-bit sampling rate using the internal LC3 codec
• The microphone defaults to mono mode, but by holding the mode button on the receiver, you can switch into stereo mode to record 2-person configurations. The LED indicator on the receiver will turn blue when in stereo mode.
• The receiver features a power button, a mode button, which doubles as the volume down button when pressed once, and a pair button, which doubles as the volume up button. The transmitters have a power button and pairing button, which doubles as the noise-cancelling button when pressed.

Long Battery Life, , Fast Charging

• Record audio for up to 8 hours with each transmitter when fully charged. Once depleted, it can recharge in just 1.5 hours using the included charging case.
• Each component features a USB-C port for direct charging. An LED indicator on the case displays battery status and flashes when the case is recharging.

Stable Audio Transmission

High-gain Laser Direct Structuring (LDS) antennas ensure stable audio transmission free of all sorts of interference from up to 1000′ away. Environmental noise cancellation minimizes frequency interference for improved vocal clarity. The LARK M2 captures 24-bit, 48 kHz audio with a 70 dB signal-to-noise ratio and 115 dB SPL.

Clip-On Transmitter Units

The transmitter features a dual-interference design with a metallic mesh that protects against dust and 2.4 GHz, infrared, and RFI interference. Easily attach the transmitter with its omnidirectional microphone to your subject of choice using the included magnetic back clips or the silicone necklace cases. A sheet of stickers allow you to customize the look of your transmitters with quirky faces or black/white covers, which go over the Hollyland logo. Included furry windscreens improve your audio quality in outdoor applications.

Plug-In Receiver with Lightning Connector

The receiver features plug-in Lightning connector design with an MFi-certified chip for compatibility with iOS. Onboard controls allow you to toggle noise cancellation and pairing. The receiver runs on plug-in power from your connected device. LED indicators show the mode status of each transmitter unit.

Long Battery Life, Charging Case

• The transmitters feature a 90mAh internal battery with a 10-hour battery life. Once depleted, recharge the transmitters in the included charging case or via USB-C ports.
• The charging case is specifically designed to accommodate the plug-in receiver and two transmitter units. Its 750mAh internal battery can recharge the transmitters twice for a total battery life of 40 hours.

Stable Audio Transmission

High-gain Laser Direct Structuring (LDS) antennas ensure stable audio transmission free of all sorts of interference from up to 1000′ away. Environmental noise cancellation minimizes frequency interference for improved vocal clarity. The LARK M2 captures 24-bit, 48 kHz audio with a 70 dB signal-to-noise ratio and 115 dB SPL.

Clip-On Transmitter Units

The transmitter features a dual-interference design with a metallic mesh that protects against dust and 2.4 GHz, infrared, and RFI interference. Easily attach the transmitter with its omnidirectional microphone to your subject of choice using the included magnetic back clips or the silicone necklace cases. A sheet of stickers allow you to customize the look of your transmitters with quirky faces or black/white covers, which go over the Hollyland logo. Included furry windscreens improve your audio quality in outdoor applications.

Plug-In Receiver with USB-C Connector

The receiver features plug-in, class-compliant USB-C connector design compatible with both iOS and Android devices. Onboard controls allow you to toggle noise cancellation and pairing. The receiver runs on plug-in power from your connected device. LED indicators show the mode status of each transmitter unit.

Long Battery Life, Charging Case

• The transmitters feature a 90mAh internal battery with a 10-hour battery life. Once depleted, recharge the transmitters in the included charging case or via USB-C ports.
• The charging case is specifically designed to accommodate the plug-in receiver and two transmitter units. Its 750mAh internal battery can recharge the transmitters twice for a total battery life of 40 hours.

Stable Audio Transmission

High-gain Laser Direct Structuring (LDS) antennas ensure stable audio transmission free of all sorts of interference from up to 1000′ away. Environmental noise cancellation minimizes frequency interference for improved vocal clarity. The LARK M2 captures 24-bit, 48 kHz audio with a 70 dB signal-to-noise ratio and 115 dB SPL.

Clip-On Transmitter Units

The transmitter features a dual-interference design with a metallic mesh that protects against dust and 2.4 GHz, infrared, and RFI interference. Easily attach the transmitter with its omnidirectional microphone to your subject of choice using the included magnetic back clips or the silicone necklace cases. A sheet of stickers allow you to customize the look of your transmitters with quirky faces or black/white covers, which go over the Hollyland logo. Included furry windscreens improve your audio quality in outdoor applications.

Dual-Channel Camera-Mount Receiver

The receiver is dual-channel and features an integrated camera-mount interface. A 3.5mm TRS output port records audio directly to your device of choice. Onboard controls allow you to toggle between stereo and mono modes or adjust the volume of your recording. LED indicators show the mode status of each transmitter unit. Use the included USB-C, USB-C to Lightning, and 3.5mm TRS cables to adapt the existing ports on the receiver to a wide variety of devices.

Long Battery Life, Charging Case

• The transmitters feature a 90mAh internal battery with a 10-hour battery life. The camera-mount receiver features a 145mAh internal battery with a 9-hour battery life. Once depleted, recharge all of the components in the included charging case in just 2 hours or via USB-C in 1.5 hours.
• The charging case is specifically designed to accommodate the camera-mount receiver and two transmitter units. Its 1950mAh internal battery can recharge the entire system three times for a total battery life of 40 hours.

Stable Audio Transmission

High-gain Laser Direct Structuring (LDS) antennas ensure stable audio transmission free of all sorts of interference from up to 1000′ away. Environmental noise cancellation minimizes frequency interference for improved vocal clarity. The LARK M2 captures 24-bit, 48 kHz audio with a 70 dB signal-to-noise ratio and 115 dB SPL.

Clip-On Transmitter Units

The transmitter features a dual-interference design with a metallic mesh that protects against dust and 2.4 GHz, infrared, and RFI interference. Easily attach the transmitter with its omnidirectional microphone to your subject of choice using the included magnetic back clips or the silicone necklace cases. A sheet of stickers allow you to customize the look of your transmitters with quirky faces or black/white covers, which go over the Hollyland logo. Included furry windscreens improve your audio quality in outdoor applications.

Camera-Mount and Plug-In Receivers

• The combo version of the LARK M2 includes a camera-mount receiver and two plug-in receivers—one Lightning and one USB-C.
• The camera-mount receiver is dual-channel and features an integrated camera-mount interface. A 3.5mm TRS output port records audio directly to your device of choice. Onboard controls allow you to toggle between stereo and mono modes or adjust the volume of your recording. LED indicators show the mode status of each transmitter unit. Use the included USB-C and 3.5mm TRS cables to adapt the existing ports on the receiver to a wide variety of devices.
• The plug-in receivers feature MFi-certified Lightning and class-compliant USB-C connectors compatible with iOS and Android devices. They run on plug-in power from your connected device. Onboard controls allow you to toggle noise cancellation and pairing. LED indicators show the mode status of each transmitter unit.

Long Battery Life, Charging Case

• The transmitters feature a 90mAh internal battery with a 10-hour battery life. The camera-mount receiver features a 145mAh internal battery with a 9-hour battery life. Once depleted, recharge all of the components in the included charging case in just 2 hours or via USB-C in 1.5 hours.
• The charging case is specifically designed to accommodate the camera-mount receiver and two transmitter units. Its 1950mAh internal battery can recharge the entire system three times for a total battery life of 40 hours.