Wooden Camera RED Komodo Accessory Kit (Pro, V-Mount)

The LW 15mm Baseplate for the RED® KOMODO™ provides lightweight 15mm rod openings positioned at the optimal distance from the lens center. It features ARRI standard M6 rosettes on both sides, 1/4-20 threaded holes, and a 3/8-16 ARRI accessory mount on the right side of the camera.

This baseplate includes an upper ARCA Swiss standard dovetail with a center screw channel and a vertical lens support post system. It attaches to the camera bottom with one 1/4-20 screw and one 3/8-16 screw. Additionally, a vertical 1/4-20 rod post can be positioned under the lens adapter, such as the Canon RF to PL Mount Pro (RED® KOMODO™).

The lower dovetail slot adheres to ARRI standards for attachment to ARRI dovetails or the included Quick Dovetail. When used with the Quick Dovetail, the baseplate and camera combination can be paired with ARRI standard bridge plates like the Quick Release Bridgeplate (19mm) or Quick Release Bridgeplate (15mm Studio).

Complete Top Mount Kit (RED® KOMODO™)
The Complete Top Mount Kit for the RED® KOMODO™ features a Top Mount that attaches to the camera body with two captive 1/4-20 screws, providing a central ARCA Swiss dovetail clamping slot, along with multiple 1/4-20 and 3/8-16 threaded holes for accessory attachment.

The included Top Handle slides into the ARCA slot, allowing easy access to the camera control screen. The top shoe mount is ideal for on-camera lights and microphones, while a side 15mm opening can hold the included monitor arm or UVF Mount V2. Several 1/4-20 and 3/8-16 ARRI accessory mounts are positioned around the handle, and a front 15mm lightweight rod bracket allows for the attachment of lens motors and other accessories.

The Monitor Hinge attaches to the ARCA slot and provides a direct 1/4-20 mount for SmallHD monitors. A rubber pad is included for third-party monitors, and a 15mm mounting spud allows the monitor arm to be quickly released and attached to the Top Handle.

The Top Plate slides into the ARCA slot, offering rows of 1/4-20 and 3/8-16 ARRI accessory mounts with standard spacing. It can be adjusted forward to allow access to the camera control screen, making it suitable for gimbal and drone systems or for use with legacy Wooden Camera products.

Battery Slide Pro V-Mount (RED® KOMODO™)
The Battery Slide Pro V-Mount attaches to the left BP-9 battery slot of the RED® KOMODO™ and powers the camera via a right-angle connector. The thumbscrew allows for easy tilt and slide adjustments.

This plate features three D-Taps that provide battery voltage for accessories, with monitored power to prevent over-current. If accessories draw more than 5.8A, a digital fuse will trip, illuminating a red LED, while the camera remains powered. Pressing the reset button will restore accessory power.

A DC Input on the right side of the camera allows for hot-swapping between a block battery and the onboard battery. Although the AC adapter supplied with the KOMODO™ can be used, it may not supply sufficient power for both the camera and accessories.

For those needing to hot-swap between a V-Mount battery and a BP-955 battery, the Battery Slide Extension for Canon BP-955 Hot Swap (RED® KOMODO™) is recommended. This extension moves the battery plate further back from the camera body for seamless transitions.